Data Interfaces - Sartorius Combics CAW1P Operating Instructions Manual

Data Interfaces

The indicator is equipped with the following data interfaces:
– COM1: Standard data interface (RS-232)
UniCOM: Universal data interface (optional)
–
Both interfaces can be configured in the Setup menu for different input and output
functions (e.g. printer, 2nd weighing platform, PC, checkweighing). The optional
UniCOM interface can be used as an RS-232, RS-485/RS-422, analog output
(voltage/current interface), galvanically separated digital I/Os, Profibus or Ethernet.
A barcode scanner can be connected (Combics 2 only) via the PS/2 socket or the
corresponding screw terminals (IP69K).
Features
– CAW*P indicators (IP44 protection):
Connect via a 25-pin D-Sub female connector.
– CAW*S indicators (IP69K protection):
Route the connecting cable from the peripheral device to the indicator via
a cable gland. The free cable ends are connected via the screw terminals.
Warning when using third-party RS-232 connecting cables: The pin assignments
3
may not be compatible with Sartorius equipment. Check the pin assignment
against the cabling diagrams and disconnect any lines that are not assigned. Fail-
ure to do so may cause malfunction, damage or even completely ruin your indica-
tor and/or peripheral device(s).
Specifications
Serial Interface:
Interface operating mode:
Level:
Connection:
Transmission rate:
Number of data bits:
Parity:
Number of stop bits:
Handshake mode:
Protocols:
Network address
SBI: Manual data output:
SBI: Auto data output:
SBI: Output format:
Printout of application data: Output of a configurable printout
Full duplex
COM1:
UniCOM 1) :
CAW*P devices (IP44 protection):
25-pin D-Sub socket
CAW*S devices (IP69K protection):
Connection via screw terminals in the housing, cable
routed into the housing via a cable gland.
150, 300, 600, 1200, 2400, 4800, 9600, 19,200 baud
(depending on the operating mode)
7, 8 bits
Space, odd, even, none (depending on the operating
mode)
1 or 2
Software (XON/XOFF), hardware (1 character after CTS)
SBI, XBPI-232
2)
various printers:
– YDP20-OCE
– YDP14IS
– YDP14IS-Label – YDP04IS-Label
4) : 0, 1, 2, ..., 31
Without stability, after stability, configurable printout
Without stability, at stability, at user-defined intervals
16 or 22 characters
Operating Instructions Combics Indicators
Data Interfaces
RS-232,
RS-232 or RS-422
, XBPI-485 , MP8-binary
1)2) 3)
– Universal
– YDP04IS
, SMA
99