Sartorius Combics CAW1P Operating Instructions Manual page 63

2 0
mDef + 20
T + 0.292 kg
x-Net + 0.183 kg
--------------------
Place empty container on the scale.
t
)
Tare the scale.
t
This is not required if the automatic tare function is active. The tare weight is
saved automatically when you place the container on the platform.
Place the mouse in the container.
t
Enter the number of sub-weighing operations using the keypad (in this example,
t
20 measurements).
O
Save the value entered and start the averaging.
t
or
r
Set the number of reference parts using r: 1, 2, 5, 10, 20, etc.
t
(
Start the calculation of the reference piece weight.
t
The averaging routine does not begin until the fluctuation in weight value remains
below a defined threshold over three consecutive measurements. The number of
sub-weighing operations remaining is shown in the numeric display.
The averaging result is displayed.
t
p
Print the results.
t
Note: If automatic printout of results is enabled, you do not need to press the
p key. The results are printed automatically.
Printout configuration: see page 93.
y When you unload the weighing platform, the display switches to the weight
readout automatically, unless configured otherwise in the menu. The weighing
instrument is ready for the next measurement.
Operating Instructions Combics Indicators
Operation
63