Documents and Services
124
Operating Instructions Combics Indicators
Documents List
Operating Instructions
UniCOM interfaces
Standard field bus interface
Verifiable alibi memory
Installation Instructions
Use in Zone 2 and 22 potentially explosive atmospheres
(option Y2)
Sartorius Services
"Installation" Service in Germany
Our "Installation" service package provides a range of important services that
guarantee satisfactory work from your device:
–
Installation
–
Commissioning
–
Inspection
–
Instruction
You can request these services from our customer service using the "Installation
Check No. 2" in the included warranty and service check folder.
Re-verification in Germany
Scale verification for legal metrology is valid until the end of the calendar year
after next.
If the scale is used for fill level control in accordance with legislation on
prepackaging, verification is valid until the end of the following calendar year.
Re-verification must currently be carried out by a weights and measures official.
Re-verification should be requested in good time from the local Weights and
Measures office.
As appropriate, please observe all statutory amendments.
Subsequent Verifications within European Countries
The expiration date of the verification depends on the national regulations of the
country in which the weighing instrument is used. For information on verification
and legal regulations currently applicable in your country, and to obtain the names
of the persons to contact, please contact your local Sartorius office, dealer, or
Service Center.
Further information concerning verification can be obtained from our customer
service centers.
98647-004-24
98646-002-04
98647-004-40
98647-004-70