Sartorius Combics CAW1P Operating Instructions Manual page 83

Preparation
Available Parameter Settings
Printout
Value saved automatically when the weighing platform is stable and the
–
defined minimum load is exceeded.
If the defined minimum load is not exceeded, you can save the item
manually
by pressing the O key. Regardless of these settings, the current value cannot
be saved automatically unless the platform is unloaded before the next sample is
placed on it. The weighing platform is considered to be unloaded when the load
is less than 50% of the minimum load.
The number of items added to memory is shown in the number display.
Press the c key to clear the totalizing memory. A printout is automatically
generated.
With two weighing platforms connected, you can add values from both platforms
to the totalizing memory. The displayed result is accurately calculated in the active
weight unit.
Example: When you add 1.243 g (determined on a weighing platform with three
decimal places) to 1.4 g (determined on a platform with 1 decimal place), the display
shows 2.643 kg.
Open the APPLIC. / APPLIC.3 / TOTALIZ menu.
t
* = Factory setting
MIN.INIT Minimum load for initialization
1 digit
2 digit
5 digit
10 digT.
20 digT.
50 digT.
100 diG.
200 diG.
500 diG.
1000 dI.
AUTO.SAV Autosave
OFF
ON
PRT.SAV. Individual/Component printout when saved
OFF
ON
VAL.FROM Source of data for autosave
APPLIC.1
APPLIC.2
SAV.VAL. Save value
NET
CALCUL.
NET+CAL
You can configure whether a printout is generated automatically when a weight
value is stored in the totalizing memory or manually by pressing the p key.
Setting: Applic./Applic.3/TOTALIZ menu item 3.17.
- You can print manually by pressing the p key (single printout): 3.17.1
- Component log (single printout of an item): 3.17. 2
The total data record is printed when you clear the totalizing memory (by pressing
the c key).
1 digit
2 digits
5 digits
10 digits
20 digits
50 digits
100 digits
200 digits
500 digits
1000 digits
Off
On
Automatic printing off
Print the entire standard print configuration
every time with the O key is pressed
Application 1
Application 2
Net
Calculation
Net and Calculated
Operating Instructions Combics Indicators
Operation
3.6
3.6.1*
3.6.2
3.6.3
3.6.4
3.6.5
3.6.6
3.6.7
3.6.8
3.6.9
3.6.10
3.16.
3.16.1*
3.16.2
3.17.
3.17.1
3.17.2*
3.22.
3.22.1*
3.22.2
3.23.
3.23.1*
3.23.2
3.23.3
83