Using The Web Interface; Required Fields; How Page Navigation Is Shown In This Guide; Supported Browsers - Cisco TelePresence Video Communication Server Administrator's Manual

Using the web interface

Configuration of the VCS is normally carried out through the web interface.
To use the web interface:
1. Open a browser window and in the address bar type either:
the IP address of the system
l
the FQDN of the system
l
2. Click Administrator Login.
3. Enter a valid administrator Username and Password and click Login (see the
section for details on setting up administrator accounts). You are presented with the Overview
page.
Note that when logging in using the VCS web interface, you may receive a warning message regarding
the VCS's security certificate. This can safely be ignored.
A command line interface

Required fields

All mandatory fields on web pages are indicated by a red star

How page navigation is shown in this guide

Instructions for navigating the web interface are shown in the format
2 followed by the Name of the page that you are taken to in order to perform a task.

Supported browsers

The VCS web interface is designed for use with Internet Explorer 6 or later, and Firefox 2 or later. It
may work with Opera and Safari, but you could encounter unexpected behavior.
Javascript and cookies must be enabled to use the VCS web interface.
Cisco VCS Administrator Guide (X6.1)
About the Cisco TelePresence Video Communication Server (VCS)
is also available.
Login accounts
.
Menu option 1 > Menu option
Page 20 of 401