Policy Service Status; Turn Relays Status - Cisco TelePresence Video Communication Server Administrator's Manual
Hide thumbs
Also See for TelePresence Video Communication Server:
- Command reference manual (95 pages)
Table of Contents
Advertisement
Field
Description
Calls
The total number of calls currently traversing the pipe. Note that a single call may
traverse more than one pipe, depending on how your system is configured.
Bandwidth
The total bandwidth of all the calls currently traversing the pipe.
used
Policy service status
The Policy service status page
on the VCS and displays their current status.
The set of policy services includes all of the services defined on the Policy services page
configuration > Dial plan > Policy
Call Policy or for registration restriction policy it will also display a Call Policy or a Registration
restriction service respectively.
The following information is displayed:
Field
Description
Name
The name of the policy service.
Clicking on a Name takes you to the configuration page for that service.
URL
The address of the service. Note that each service can be configured with multiple server
addresses for resiliency. This field displays the server address currently selected for use by
the VCS.
Status The current status of the service.
Last
Indicates when the service was last requested by a VCS process.
used
TURN relays status
The TURN relays page
VCS. For each relay, it shows the requesting client address and port and the corresponding VCS
address and port.
Note: TURN services are available on VCS Expressways only. They are configured from the TURN
page
(VCS configuration > Expressway >
The following information is displayed:
Field
Description
Relay
The index number of the relay.
Address
The IP address and port on the VCS of the relay resource that has been allocated for
this particular request.
Client
The IP address and port on the NAT (or the client if there is no NAT) that requested the
relay.
Cisco VCS Administrator Guide (X6.1)
(Status > Policy
services), plus if a remote service has been selected for either
(Status > TURN
relays) lists all the currently active TURN Relays on the
TURN).
Overview and status information
services) lists all of the policy services configured
(VCS
Page 38 of 401
Advertisement
Table of Contents
