Stripping @Domain For Dialing To H.323 Numbers - Cisco TelePresence Video Communication Server Administrator's Manual

Field
Rule name
Description
Priority
Source
Request must be
authenticated
Mode
Pattern type
Pattern string
Pattern behavior
Replace string
On successful match
Target zone
State

Stripping @domain for dialing to H.323 numbers

SIP endpoints can only make calls in the form of URIs - for example name@domain. If the caller does
not specify a domain when placing the call, the SIP endpoint automatically appends its own domain to
the number that is dialed. So if you dial 123 from a SIP endpoint, the search will be placed for
123@domain. If the H.323 endpoint being dialed is registered as 123, the VCS will be unable to
locate the alias 123@domain and the call will fail.
If you have a deployment that includes both SIP and H.323 endpoints that register using a number,
you will need to set up the following
will let users place calls from both SIP and H.323 endpoints to H.323 endpoints registered using their
H.323 E164 number only.
Pre-search transform
On the Create transforms page
Field
Priority
Description
Pattern type
Pattern string
Pattern behavior
Cisco VCS Administrator Guide (X6.1)
Value
Transform to example.net
Transform example.com to example.net
100
Any
No
Alias pattern match
Suffix
example.com
Replace
example.net
Continue
Head office
Enabled
pre-search transform
(VCS configuration > Dial plan > Transforms >
Value
1
Take any number-only dial string and append @domain
Regex
(\d+)
Replace
Dial plan and call processing
and local zone search rules. Together these
New):
Page 125 of 401