Cisco TelePresence Video Communication Server Administrator's Manual page 161

Field Description
Rule name A descriptive name for the membership rule.
Description An optional free-form description of the rule.
Priority The order in which the rules are applied (and
thus to which subzone the endpoint is
assigned) if an endpoint's address satisfies
multiple rules.
Type Determines how a device's address is
checked:
Subnet: assigns the device if its IP address
falls within the configured IP address
subnet.
Alias pattern match: assigns the device if
its alias matches the configured pattern.
Subnet These two fields together determine the
address and range of IP addresses that will belong to
Prefix this subzone.
length
The Address range field shows the range
of IP addresses to be allocated to this
subzone, based on the combination of the
Subnet address and Prefix length.
Pattern type How the Pattern string must match the
alias for the rule to be applied. Options are:
Exact: the entire string must exactly match
the alias character for character.
Prefix: the string must appear at the
beginning of the alias.
Suffix: the string must appear at the end of
the alias.
Regex: treats the string as a
expression.
Pattern The pattern against which the alias is
string compared.
Target The subzone to which an endpoint is
subzone assigned if its address satisfies this rule.
State Indicates if the rule is enabled or not.
Cisco VCS Administrator Guide (X6.1)
Usage tips
The description appears as a tooltip if
you hover your mouse pointer over a
rule in the list.
The rules with the highest priority (1,
then 2, then 3 and so on) are applied
first. If multiple Subnet rules have the
same priority, the rule with the largest
prefix length is applied first. Alias
pattern match rules at the same priority
are searched in configuration order.
Pattern matching is useful, for
example, for home workers on
dynamic IP addresses; rather than
having to continually update the subnet
to match what has been allocated, you
can match against their alias instead.
Applies only if the Type is Subnet.
Applies only if the Type is Alias pattern
match.
regular
Applies only if the Type is Alias pattern
match.
Bandwidth control
Page 161 of 401