Related Manuals for Cisco TD 92322GB
Summary of Contents for Cisco TD 92322GB
- Page 1 TD 92322GB Installation and Operation Manual Integrated Message Server, IMS/IP-WiFi 2007-06-26/ Ver. D...
-
Page 2: Table Of Contents
6.1 Nomenclature ... 12 6.2 Technical Specification ... 12 6.3 Parameter Setup ... 12 6.4 Configuration ... 13 6.4.1 Define Inputs and Outputs ... 13 6.4.2 Define an Event ... 14 6.5 Backup and Restore ... 14 2007-06-26/ Ver. D TD 92322GB... - Page 3 10 Phonebook Service and Route2ELISE ... 25 11 Open Access Protocol... 25 11.1 Configuration ... 25 12 Related Documents ... 26 Document History ... 27 Appendix A: IMS/IP and Firewalls... 28 Appendix B: Basic Alarm Manager Configuration Examples... 29 2007-06-26/ Ver. D TD 92322GB...
-
Page 4: Introduction
This document describes the installation and configuration of IMS/IP-WiFi, the Integrated Message Server for the VoWiFi system. The IMS/IP-WiFi is a message server based on the ELISE hardware. It acts as a messaging gateway and controls messaging and alarm between Ascom messaging systems and the VoWiFi handsets in the VoWiFi System. -
Page 5: Requirements
IMS for VoWiFi licence Additional licences for IMS/IP OAP licences: • Basic messaging (acknowledge included) • Basic messaging, interactive messaging, and user data • Basic messaging and alarm • Basic messaging, interactive messaging, user data, and alarm 2007-06-26/ Ver. D TD 92322GB... -
Page 6: Installation (Elise2)
Problems when starting the applications, check the log files on the IMS/IP Administration web page for more information. Paging waiting in queue to A-bus No paging in queue to A-bus on page 11, for more information about the Basic TD 92322GB figure figure 2... -
Page 7: Function Indicator And Error Relay Output
Flashing red Released (1000ms ON/3000 ms OFF) Flashing orange Released (100ms ON/800 ms OFF) Function Indicator Error Relay Green Operates Flashing red Released (1000ms ON/3000 ms OFF) Flashing orange Released (100ms ON/800 ms OFF) TD 92322GB on page 8 for more... -
Page 8: Addressing Of The Ims/Ip
The IMS/IP has full functionality in unlicensed mode for 2 hours. After that, it must be restarted, either physically from the unit or from the IMS/IP Administration web page. How to set the IMS/IP in unlicensed mode is described in Installation Guide, ELISE2, TD 92232GB. 2007-06-26/ Ver. D TD 92322GB... -
Page 9: Configuration
If a User Server is used the operating mode for the UNS must be set to “forwarding” and the User Server (the ESS which has the users defined) must be specified as the forwarding destination. -
Page 10: Interface Groups
A common password can be specified in the IMS/IP, and this password is then used for all VoWiFi handsets in the system. If the common password field is left empty, the handset must send an empty password for authentication. 2007-06-26/ Ver. D 8 Handset Administration on page 22. TD 92322GB... -
Page 11: Messaging Tool
Integrated Message Server, IMS/IP-WiFi If individual passwords is needed, for example for shared phones, passwords can either be specified in a User Server or the individual call numbers can be used, refer to Phones. Forced login allows a user to login with a call number that already is in use. The handset that already is logged in will then be unregistered. -
Page 12: Message Distribution
1.The Special Location can be sent every time a pocket unit gets a new location from a locator in the system. This requires configuration both in the handset and in the locator. Also called “Immediate Alarm Transmission”. 2007-06-26/ Ver. D information from Pocket Units. TD 92322GB... -
Page 13: User Server
Installation and Operation Manual Integrated Message Server, IMS/IP-WiFi 3.3.3 User Server IMS/IP can use an ESS as a user server for authentication of portables, see System on page 7. Select System Setup > User Server on the IMS/IP administration page. -
Page 14: Basic Alarm Manager
Figure 4. Communication flow for the Basic Alarm Manager and external systems. 2007-06-26/ Ver. D IMS / IP Basic Alarm Manager Interface Handler IMS Inputs IMS Outputs Input Activate Activity Output Activate Output A-bus Input Activity TD 92322GB WLAN Interface Alarm Mobile Data VoWiFi Message... -
Page 15: Nomenclature
Basic Alarm Manager. 1.From this version the Alarm Module can be configured to send Input Activity information both when the input is opened and closed. Previous versions have no support for this. 2007-06-26/ Ver. D Software version 4.00 figure TD 92322GB... -
Page 16: Configuration
ELISE Installation Guide. 2.Every module that is connected to the A-bus has a two digit hexadecimal address that is set with a DIP switch. 2007-06-26/ Ver. D figure on the A-bus, and the input number. The states that can be TD 92322GB... -
Page 17: Define An Event
1.The IMS/IP has two outputs of open-collector type. When the output is active, it is called ‘low’ in the Basic Alarm Manager. For more information about the outputs, see the ELISE Installation Guide. 2007-06-26/ Ver. D Appendix TD 92322GB... -
Page 18: Ims/Ip Phonebook Configuration
The internal IMS/IP Phonebook gives the possibility to search for phone numbers in a local database or in an LDAP server. If the search is to be forwarded to an LDAP server, the LDAP parameters need to be configured as described in... -
Page 19: Phonebook Setup
Search result Sorry, no match 7.3.2 Select Phonebook Database Select which database to use for phone numbers; “Local” database, or “LDAP” server. • If the default local database is selected, continue below in chapter Phonebook Administration. • If LDAP server is selected, continue in chapter Local Phonebook Administration The local phonebook database is administrated from a web browser. -
Page 20: Update The Local Database
When all entries have been added, click “Save changes”. Click the “Edit” button to return to the window in 2007-06-26/ Ver. D figure 8 will appear. figure 9 will appear. figure TD 92322GB... -
Page 21: Export The Local Database
Log on with user. The default password is password. Click the Administrate IMS/IP Phonebook link. The window shown in Click “Delete phonebook”. Click “OK” in the dialogue window that appears. 2007-06-26/ Ver. D figure 10 will appear. figure 10 will appear. TD 92322GB... -
Page 22: Ldap Parameter Setup
Note: If the authentication method “SASL/DIGEST-MD5” is selected, the IP address for primary DNS server must be entered in the DNS server field on the Network. Otherwise it is not possible to authenticate with the LDAP directory Microsoft Active Directory 2003. -
Page 23: Examples Of Settings
Figure 11. Settings for the LDAP directory in the VoIP Gateway • Active directory 2003 Figure 12. Settings for Active directory 2003 • Cisco CallManager Figure 13. Settings for Cisco CallManager 2007-06-26/ Ver. D Figure 5. i Figure 6. Figure 7. TD 92322GB... -
Page 24: Operation
All entries where the first name starts with L and the family name starts with B. All first names that starts with An. All family names that start with An. 2 0 0 All telephone numbers that end with 200. TD 92322GB... -
Page 25: Handset Administration
The search result list can be exported to a comma separated file. Click the “Export Result” button. Select “Save this file to disk”. Enter a file name and the location where the file should be stored, and click “Save”. 2007-06-26/ Ver. D TD 92322GB... -
Page 26: Remove Ip Address, Force A Relogin, Or Delete A Vowifi Handset
Select on/off in the Manual Absent drop-down list, see 2007-06-26/ Ver. D icon in the search result list, see figure 15 8.1 Search for Registered Handsets icon to view handset details. TD 92322GB figure 15 on page 22 on page 22. All details on page 22. figure 16... -
Page 27: Messaging Tool
A pop-up window indicates whether the message has been sent or not. Figure 18. Message sent and not sent. If the message has not been sent, try to send the message again. Possible errors are: • No address • Licence error 2007-06-26/ Ver. D TD 92322GB 3.1.7... -
Page 28: Phonebook Service And Route2Elise
11.1 Configuration The Message Distribution lists for the different interfaces have to be configured to send the information to the OAP Server, in order to give the client access to the information. The address of the OAP Server is xxx.xxx.xxx.xxx/OAP. -
Page 29: Related Documents
Installation and Operation Manual Integrated Message Server, IMS/IP-WiFi Related Documents Data Sheet, Integrated Message Server IMS/IP - WiFi Installation Guide, ELISE2 Function Description, Open Access Protocol Function Description, Activity Logging in Unite Installation and Operation Manual, Phonebook Service Installation and Operation Manual, Enhanced System Services, ESS TD 92253GB... -
Page 30: Document History
3.1.2 Shared Phones login and call diversion display text, added to System on page 7. • Parameter settings for LDAP in 7.5 LDAP Parameter Setup page 19. TD 92322GB on page 7, on page 10. on page 6. 3.1.6 WLAN... -
Page 31: Appendix A: Ims/Ip And Firewalls
Web configuration of the IMS/IP Network Time Protocol (NTP) 3217 Other Unite compliant units 2775 Phonebook Service 1321 OAP Server 1322 OAP Server 10101 Remote connection 33000 Handset communication Lightweight Directory Access Protocol (LDAP) 2007-06-26/ Ver. D TD 92322GB Transport protocol... -
Page 32: Appendix B: Basic Alarm Manager Configuration Examples
It doesn’t matter which handset that sends the data so the trigger is general when it comes to handset number. 2007-06-26/ Ver. D Type Push-button double press Beep code Alarm from 1440 Alarm from 1440 Alarm from 1440 Activation Duration High – Data 1440 TD 92322GB... - Page 33 – Activation Activation Repetition time (s) time (s) – Message text Beep code Cold-storage room 1, door is open Activation Duration – Activation Activation Repetition time (s) time (s) – TD 92322GB Max. No. of Repetitions Max. No. of Repetitions...
- Page 34 Cold-storage room 1, door is open Cold-storage room 1, door is open Activation Duration High – Activation Activation Repetition time (s) time (s) – Activation Duration – – TD 92322GB Max. No. of Repetitions Max. No. of Repetitions...