Vcs Functionality: Changes And Limitations; Configuring Language Settings; Changing The Language - Cisco TelePresence Video Communication Server Administrator's Manual

incident reporting is disabled
n
any connection to an
n
Warnings are raised for any non-recommended configuration settings.

VCS functionality: changes and limitations

When in secure mode, the following changes and limitations to standard VCS functionality apply:
access over SSH, Telnet, and through the serial port is disabled and cannot be turned on
n
access over HTTPS is enabled and cannot be turned off
n
the command line interface (CLI) is unavailable
n
the root account, the admin account and any other local administrator accounts are disabled
n
if there are three consecutive failed attempts to log in (by the same or different users), login access
n
to the VCS is blocked for 60 seconds
immediately after logging in, the current user is shown statistics of when they previously logged in
n
and details of any failed attempts to log in using that account
administrator accounts with read-only or read-write access levels cannot view the Event Log and
n
Configuration Log pages (these pages can only be viewed by accounts with Auditor access level)
the Upgrade page only displays the VCS platform component
n
downgrades to version X5.0 or below are not allowed
n
the classification banner is displayed on every web page
n
Note: the Event Log, Configuration Log, call history, search history and registration history are cleared
whenever the VCS is taken out of advanced account security mode.

Configuring language settings

The Language page (Maintenance >
in the web user interface.

Changing the language

You can configure both the default language and the language to use on an individual browser:
Field Description
System The default language used on the web
default interface.
language
This The language used by the current
browser browser on the current client
computer. It can be set to use either
the system default language or a
specific alternative language.
Note:
You can also get to the Language page by clicking on the Language link at the bottom of every
n
page.
If you upgrade to a later version of VCS software you may need to install a later version of the
n
associated language pack to ensure that all text is available in the chosen language.
Cisco VCS Administrator Guide (X6.1)
external manager uses HTTPS and has certificate checking enabled
Language) controls which language is used for text displayed
Usage tips
You can select from the set of installed language
packs.
This setting applies to the browser currently in
use on the client computer. If you access the
VCS user interface using a different browser or a
different computer, a different language setting
may be in place.
Maintenance
Page 203 of 401