Cisco UCS C200 Installation And Service Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Server
  5. UCS C200
  6. Installation and service manual

Cisco UCS C200 Installation And Service Manual

Hide thumbs Also See for UCS C200:
Table of Contents

Advertisement

Quick Links

See also: Configuration Manual
Enlarged version
Cisco UCS C200 Server
Installation and Service Guide
Covers UCS C200 Server Generations M1 and M2
July 31, 2013
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
http://www.cisco.com
Tel: 408 526-4000
800 553-NETS (6387)
Fax: 408 527-0883
Text Part Number: OL-20732-02

Advertisement

Table of Contents
loading

Related Manuals for Cisco UCS C200

Summary of Contents for Cisco UCS C200

  • Page 1 Cisco UCS C200 Server Installation and Service Guide Covers UCS C200 Server Generations M1 and M2 July 31, 2013 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883...
  • Page 2 Modifications to this product not authorized by Cisco could void the FCC approval and negate your authority to operate the product. The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as part of UCB’s public domain version of the UNIX operating system.

  • Page 3: Table Of Contents

    Clearing the BIOS Admin Password Using Jumper J1E4 2-19 Maintaining the Server C H A P T E R Server Monitoring and Management Tools Cisco Integrated Management Interface (CIMC) Server Configuration Utility Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 4 Replacing a PCIe Card 3-35 Replacement Procedure 3-36 Special Considerations for the Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01) 3-38 How to Identify Which Power Supply Model is in Your Server 3-38 Installing Multiple PCIe Cards and Resolving Limited Resources...
  • Page 5 How To Launch Option ROM-Based Controller Utilities Restoring RAID Configuration After Replacing a RAID Controller For More Information Installation for Cisco UCS Integration A P P E N D I X Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 6 Contents Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 7: Related Documentation

    This preface describes the audience, organization, and conventions of the Cisco UCS C200 Server Installation and Service Guide. It also provides information on how to obtain related documentation. This guide covers UCS C200 Server Generations M1 and M2. Differences between the generations are noted in text.
  • Page 8 Tämä varoitusmerkki merkitsee vaaraa. Tilanne voi aiheuttaa ruumiillisia vammoja. Ennen kuin käsittelet laitteistoa, huomioi sähköpiirien käsittelemiseen liittyvät riskit ja tutustu onnettomuuksien yleisiin ehkäisytapoihin. Turvallisuusvaroitusten käännökset löytyvät laitteen mukana toimitettujen käännettyjen turvallisuusvaroitusten joukosta varoitusten lopussa näkyvien lausuntonumeroiden avulla. SÄILYTÄ NÄMÄ OHJEET Cisco UCS C200 Server Installation and Service Guide viii OL-20732-02...
  • Page 9 Utilize o número da instrução fornecido ao final de cada aviso para localizar sua tradução nos avisos de segurança traduzidos que acompanham este dispositivo. GUARDE ESTAS INSTRUÇÕES Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 10 Använd det nummer som finns i slutet av varje varning för att hitta dess översättning i de översatta säkerhetsvarningar som medföljer denna anordning. SPARA DESSA ANVISNINGAR Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 11 Brug erklæringsnummeret efter hver advarsel for at finde oversættelsen i de oversatte advarsler, der fulgte med denne enhed. GEM DISSE ANVISNINGER Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 12 Preface Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 13: Obtaining Documentation And Submitting A Service Request

    Obtaining Documentation and Submitting a Service Request For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What’s New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html...
  • Page 14 Preface Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 15 C H A P T E R Overview The Cisco UCS C200 Server, which is a part of the Cisco UCS C-Series Rack-Mount server family, is designed to operate in a wide range of data center environments, including those environments that use the Cisco Unified Computing System, Cisco Nexus family products, and discrete Ethernet and Fibre Channel switches from Cisco and third parties.

  • Page 16: Chapter 1 Overview

    1. See the following caution. 2. See the following caution. Do not use the Reset button. This button is for development debugging only. This button will reset Caution memory and CPU settings to the defaults. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 17 Power supply (up to two) Video connector (DB15 VGA) 10/100 Ethernet management port (RJ-45) 10/100/1000 Gigabit Ethernet ports (two) USB 2.0 connectors (two) Low-profile PCIe card slot Serial connector (DB9) Standard-profile PCIe card slot Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 18 Chapter 1 Overview The Cisco UCS C200 server has the following components and features. Differences between the Large Form Factor (LFF) version of the server (PID R200-1120402W) and the Small Form Factor (SFF) version of the server (PID UCS-BSE-SFF-C200) are noted.
  • Page 19 4. SATA = serial advanced technology attachment 5. VGA = video graphics array 6. USB = universal serial bus 7. KVM = keyboard, video, mouse 8. PCIe = peripheral component interconnect express Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 20 Chapter 1 Overview 9. RAID = redundant array of independent disks Appendix A, “Technical Specifications” for more physical, environmental, and power details. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 21: Installing The Server

    Statement 1071 Only trained and qualified personnel must be allowed to install, replace, or service this equipment. Warning Statement 1030 Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 22: Chapter 2 Installing The Server

    Shipping Box Contents Reset Console PSU MEM CPU UCS C200 Server Documentation Drivers and Utilities disc KVM cable Power cord (up to two) C200 SFF server only: Two SAS cables (R200-SASCBL) Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 23: Preparing For Installation

    Avoid UPS types that use ferroresonant technology. These UPS types can become unstable with systems Caution such as the Cisco UCS, which can have substantial current draw fluctuations from fluctuating data traffic patterns. Cisco UCS C200 Server Installation and Service Guide...

  • Page 24: Rack Requirements

    The minimum vertical rack space per server must be one rack unit (RU), equal to 1.75 inches (4.45 cm). The distance between the front and rear rack posts must be as follows to fit the Cisco slide rails: • –...

  • Page 25: Installing The Server Into A Rack

    If your rack has #10-32 rack-post holes, align the mounting pegs with the holes and then compress the spring-loaded pegs to expose the #10-32 inner peg. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 26 Pegs in standard (uncompressed) position Pegs compressed to expose 10-32 inner peg Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops and lock in place. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 27 Push the plastic installation release clip on each mounting bracket toward the server rear (see item 4 in Figure 2-4), and then continue pushing the server into the rack until its front flanges touch the rack posts. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 28 Two-hole slotted bracket on end of CMA length-adjustment slider Rear of left slide rail assembly Outermost CMA attachment clip Step 5 Continue with the “Connecting and Powering On the Server (Standalone Mode)” section on page 2-9. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 29: Initial Server Setup

    Cisco Integrated Management Interface (CIMC). If you want to use the 10/100 management ports or a Cisco network adapter card port to access the CIMC, you must first connect to the server and change the NIC mode as described in Step 3 of the following procedure.
  • Page 30 Shared LOM (default)—The two 1Gb Ethernet ports are used to access the CIMC. This is the – factory default setting, along with Active-active NIC redundancy and DHCP enabled. Cisco Card—The ports on an installed Cisco network adapter card are used to access the CIMC. – You have to select a NIC redundancy and IP setting.
  • Page 31 The links to these documents are in the C-Series documentation roadmap: http://www.cisco.com/go/unifiedcomputing/c-series-doc To install or replace hardware components, see the “Maintaining the Server” section on page 3-1. Cisco UCS C200 Server Installation and Service Guide 2-11 OL-20732-02...

  • Page 32: Nic Modes And Nic Redundancy Settings

    Shared LOM (default)—The two 1Gb Ethernet ports are used to access the CIMC. This is the factory default setting, along with Active-active NIC redundancy and DHCP enabled. Cisco Card—The ports on an installed Cisco network adapter card are used to access the CIMC. You •...

  • Page 33: System Bios And Cimc Firmware

    Your system firmware must be at minimum level 1.2 to use the Cisco Host Upgrade Utility. If Note your firmware is prior to level 1.2, you must use the methods below to update the BIOS and CIMC firmware individually.

  • Page 34: Accessing The System Bios

    Step 6 Follow the instructions on the Exit menu screen to save your changes and exit the setup utility (or Press F10). You can exit without saving changes by pressing Esc. Cisco UCS C200 Server Installation and Service Guide 2-14 OL-20732-02...

  • Page 35: Motherboard Jumpers

    Clearing the BIOS Admin Password Using Jumper J1E4, page 2-19 • Figure 2-6 Service Jumper Locations Jumper J1E6 (clear CMOS) Jumper J45 (clear CIMC password) Jumper J1E5 (BIOS recovery) Jumper J1E4 (clear BIOS password) Cisco UCS C200 Server Installation and Service Guide 2-15 OL-20732-02...

  • Page 36: Using The Bios Recovery Jumper J1E5 To Recover Corrupt Bios

    Replace the top cover, replace the server in the rack, replace power cords and any other cables, then Step 15 power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 2-16 OL-20732-02...

  • Page 37: Clearing The Cimc Admin Password Using Jumper J45

    Replace the top cover, replace the server in the rack, replace power cords and any other cables, then Step 11 power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 2-17 OL-20732-02...

  • Page 38: Using The Clear Cmos Jumper J1E6

    Replace the top cover, replace the server in the rack, replace power cords and any other cables, then Step 11 power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 2-18 OL-20732-02...

  • Page 39: Clearing The Bios Admin Password Using Jumper J1E4

    If you do not remove the jumper, the password is cleared every time that you power-cycle the server. Replace top cover, replace the server in the rack, replace power cords and any other cables, then power Step 11 on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 2-19 OL-20732-02...
  • Page 40 Chapter 2 Installing the Server System BIOS and CIMC Firmware Cisco UCS C200 Server Installation and Service Guide 2-20 OL-20732-02...

  • Page 41: Server Monitoring And Management Tools

    Configuring some RAID configurations • Installing operating systems This utility is shipped with new servers on CD. You can also download the ISO from Cisco.com. See the user documentation for this utility at the following URL: http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/20/SCUUG20.html Cisco UCS C200 Server Installation and Service Guide...

  • Page 42: Chapter 3 Maintaining The Server

    CPU fault LED Hard drive fault LED Network activity LED Hard drive activity LED System fault LED Power supply fault LED Locator LED/Locator button Memory fault LED 10 Power status LED/Power button Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 43 Off—All power supplies are operating properly. • Amber—At least one power supply has failed. • Memory fault Off—All DIMMs are operating properly. • Amber—At least one memory bank has a failed DIMM. • Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 44: Rear Panel Leds

    Figure 3-3 Rear Panel LEDs Power supply status LED 10/100 Ethernet link status LED Rear Locator LED 10/100/1000 Gigabit Ethernet speed LED 10/100 Ethernet speed LED 10/100/1000 Gigabit Ethernet link status LED Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 45 Link status amber + speed solid green—A half-duplex, 100-Mbps • link is present. Link status off + speed blinking green—A full-duplex, • 10-Mbps link is present. Link status amber + speed blinking green—A full-duplex, • 100-Mbps link is present. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 46 Link status off + speed blinking green—A full-duplex, 10-Mbps link is present. Link status green + speed blinking green—A full-duplex, • 100-Mbps link is present. Link status amber + speed blinking green—A full-duplex, • 1000-Mbps link is present. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 47: Preparing For Component Installation

    • Configuration Guide or the Cisco UCS C-Series Rack-Mount Server CLI Configuration Guide. Use the Power button on the server front panel. To use the Power button, follow these steps: • Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 48: Removing And Replacing The Server In A Rack

    2-7), and then continue pushing the server in evenly until its front flanges touch the rack posts. Tighten the thumbscrews on each flange to secure the server to the rack posts. Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 49: Removing And Replacing The Server Top Cover

    Use a Number 2 Phillips head screwdriver to remove the two screws that secure the top cover (Generation M1 only). The UCS C200 Generation M2 server does not have cover screws. Note Press down on the release button and use the nonslip pad to push the cover toward the rear about one inch, until you feel it stop sliding.

  • Page 50: Removing And Replacing The Server Front Cover (Small Form Factor Only)

    Removing and Replacing the Server Top Cover, page 3-9. Figure 3-5 Removing the Front Cover of the Server Front cover, with 4 screws on the upper surface and 3 screws on each side Cisco UCS C200 Server Installation and Service Guide 3-10 OL-20732-02...

  • Page 51: Replaceable Component Locations

    CPUs and heatsinks (up to two) 10 Socket for mezzanine card 11 Power supplies (up to two, accessible through Motherboard CMOS battery rear bays) PCIe card connector on riser card (with standard-profile slot) Cisco UCS C200 Server Installation and Service Guide 3-11 OL-20732-02...
  • Page 52 CPUs and heatsinks (up to two) Motherboard CMOS battery 12 Power supplies (up to two, accessible through rear bays) 13 Internal USB port on motherboard (active in server Generation M2 only) Cisco UCS C200 Server Installation and Service Guide 3-12 OL-20732-02...

  • Page 53: Installing Or Replacing Components

    Replacing a PCIe Riser Card Assembly, page 3-34 • Replacing a PCIe Card, page 3-35 • Replacing an LSI MegaRAID Battery Backup Unit, page 3-41 • Installing a Mezzanine Card, page 3-46 • Cisco UCS C200 Server Installation and Service Guide 3-13 OL-20732-02...

  • Page 54: Replacing A Front Panel Control Module Or Dvd Module (Small Form Factor Only)

    See Figure 3-9. Replace the front cover as described in the “Removing and Replacing the Server Front Cover (Small Form Factor Only)” section on page Cisco UCS C200 Server Installation and Service Guide 3-14 OL-20732-02...
  • Page 55 Power button. Figure 3-8 Removing and Replacing a Front Panel Control Module or DVD Module Securing screw Securing pegs on chassis (three) Keyed holes on module (three) Cisco UCS C200 Server Installation and Service Guide 3-15 OL-20732-02...
  • Page 56 Front VGA Front VGA SATA CONN SATA CONN Fans Fans Front panel control module module Securing screw (one on each end) Fan tray connector Fan tray with battery unit bracket Cisco UCS C200 Server Installation and Service Guide 3-16 OL-20732-02...

  • Page 57: Installing Hard Drives Or Solid State Drives

    Note Cisco recommends following the industry-standard practice of using drives of the same capacity when configuring RAID volumes. If you use drives of different capacities, the usable portion of the smallest drive will be used on all drives of the RAID volume.
  • Page 58 HDD_02 HDD_03 HDD_04 Figure 3-11 Removing and Replacing Hard Drives (Large Form Factor) Reset Console PSU MEM CPU Release button Hard drive sled, bottom view Ejector lever Securing screws (four) Cisco UCS C200 Server Installation and Service Guide 3-18 OL-20732-02...
  • Page 59 Drive Numbering and Physical Orientation, Facing Server Front (Small Form Factor) HDD_01 HDD_02 HDD_03 HDD_04 HDD_05 HDD_06 HDD_07 HDD_08 Figure 3-13 Removing and Replacing Hard Drives (Small Form Factor) Ejector lever Securing screws (four) Release button Cisco UCS C200 Server Installation and Service Guide 3-19 OL-20732-02...

  • Page 60: Installing Power Supplies

    Replace the power cord to the new power supply. Press the Power button to return the server to main power mode. Figure 3-14 Removing and Replacing a Power Supply PSU2 PSU1 PSU2 PSU1 Release lever Power supply handle Cisco UCS C200 Server Installation and Service Guide 3-20 OL-20732-02...

  • Page 61: Installing A Fan Tray

    Replace the cable cover and the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-21 OL-20732-02...
  • Page 62 Maintaining the Server Installing or Replacing Components Figure 3-15 Removing and Replacing a Fan Tray Securing screw (one on each end) Fan tray connector Fan tray with battery unit bracket Cisco UCS C200 Server Installation and Service Guide 3-22 OL-20732-02...

  • Page 63: Installing Dimms

    Bank–1, while A2, B2, C2 belong to Bank–2. Note that each slot within Bank 1 is blue, while each slot within Bank 2 is black. See Figure 3-16. Cisco UCS C200 Server Installation and Service Guide 3-23 OL-20732-02...
  • Page 64 Note that this causes the system BIOS to default to standard-voltage operation (Performance Mode). See Low-Voltage DIMM Considerations (Generation M2 Only), page 3-25. Low voltage DIMMs are supported in Generation M2 servers only. Note Cisco UCS C200 Server Installation and Service Guide 3-24 OL-20732-02...
  • Page 65 DIMMs, memory mirroring is automatically disabled. If memory mirroring is used, the DRAM size is reduced by 50 percent for reasons of reliability. • Memory sparing is not supported. Cisco UCS C200 Server Installation and Service Guide 3-25 OL-20732-02...

  • Page 66: Dimm Installation Procedure

    Replace the air baffle and the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-26 OL-20732-02...
  • Page 67 Maintaining the Server Installing or Replacing Components Figure 3-17 Removing and Replacing Memory Modules DIMM slots (twelve) Alignment key in DIMM slot DIMM slot ejector lever (two on each slot) Cisco UCS C200 Server Installation and Service Guide 3-27 OL-20732-02...

  • Page 68: Installing Cpus And Heatsinks

    Additional CPU-Related Parts To Order With RMA Replacement Motherboards When a return material authorization (RMA) of the motherboard or CPU is done on a Cisco UCS C-series server, there are additional parts that might not be included with the CPU or motherboard spare bill of materials (BOM).

  • Page 69: Cpu Replacement Procedure

    Replace the air baffle and the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-29 OL-20732-02...
  • Page 70 Maintaining the Server Installing or Replacing Components Figure 3-18 Removing and Replacing CPUs and Heatsinks Captive heatsink screws (two per CPU) CPU socket alignment keys CPU cover plate CPU socket latch Cisco UCS C200 Server Installation and Service Guide 3-30 OL-20732-02...

  • Page 71: Installing A Motherboard Cmos Battery

    Ensure that the retaining clip clicks over the top of the battery. Replace the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-31 OL-20732-02...

  • Page 72: Installing A Trusted Platform Module

    TPM to press the connector into the socket. Replace the securing screw that holds the TPM to the motherboard standoff. Replace the PCIe riser card assembly. Cisco UCS C200 Server Installation and Service Guide 3-32 OL-20732-02...
  • Page 73 You can reboot the server by pressing the Power button on the server; by selecting Macros > Ctrl-Alt-Del on the Cisco KVM Console window menu bar; or by selecting Power Cycle Server on the Server Summary tab of the CIMC GUI.

  • Page 74: Replacing A Pcie Riser Card Assembly

    Replace the screw that secures the assembly to the chassis. Replace the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-34 OL-20732-02...

  • Page 75: Replacing A Pcie Card

    How to Identify Which Power Supply Model is in Your Server, page 3-38 • Installing Multiple PCIe Cards and Resolving Limited Resources, page 3-39 If you are installing a Cisco UCS P81E Virtual Interface Card (N2XX-ACPCI01), there are prerequisite Note considerations. See...

  • Page 76: Replacement Procedure

    Power button. Step 4 If the card that you replaced was a RAID controller card, see Restoring RAID Configuration After Replacing a RAID Controller, page C-6. Cisco UCS C200 Server Installation and Service Guide 3-36 OL-20732-02...
  • Page 77 PCIe Slot 6 Figure 3-23 Removing and Replacing a PCIe Card Riser card assembly removed from chassis PCIe card rear plate PCIe socket on riser card PCIe card retaining latch Cisco UCS C200 Server Installation and Service Guide 3-37 OL-20732-02...

  • Page 78: Special Considerations For The Cisco Ucs P81E Virtual Interface Card (N2Xx-Acpci01)

    This server supports installation of one of these cards. • This card is supported only in PCIe slot 6 of this server. • This card must be installed in PCIe slot 6 to use the Cisco Card NIC mode (see Figure 3-22 on Note page 3-37).

  • Page 79: Installing Multiple Pcie Cards And Resolving Limited Resources

    ROMs for the onboard NICs to be booted from are enabled in the BIOS Setup Utility. Disable other option ROMs that are not needed to create sufficient memory space for the onboard NICs. Cisco UCS C200 Server Installation and Service Guide 3-39...
  • Page 80 Physically remove any unused PCIe cards. If the system has one or more Cisco virtual interface cards (VICs) installed, disable the PXE boot on the VICs that are not required for the system boot configuration by using the Network Adapters page in the CIMC WebUI to free up some 16-bit I/O resources.

  • Page 81: Replacing An Lsi Megaraid Battery Backup Unit

    Replacing an LSIiBBU08 BBU, page 3-43 • Replacing an LSIiBBU06 BBU This BBU is supported by Cisco for use with the following RAID controller cards: LSI MegaRAID 9260-4i (Cisco product ID R200-PL004, LSI 6G MegaRAID 9260-4i • card w/512MB write cache) LSI MegaRAID 9280-4i4e (Cisco product ID UCSC-RAID-C-4i4e, LSI 9280-4i4e) •...
  • Page 82 Be careful to align the arrow-mark on the cable connector with the arrow-mark on the socket to avoid Note damaging the connector pins. Figure 3-24 Removing and Replacing an LSIiBBU06 BBU BBU bracket on fan tray BBU (connector J2 is on the underside) Securing screws (three) Cisco UCS C200 Server Installation and Service Guide 3-42 OL-20732-02...

  • Page 83: Replacing An Lsiibbu08 Bbu

    Maintaining the Server Installing or Replacing Components Replacing an LSIiBBU08 BBU This BBU is supported by Cisco for use with the following RAID controller cards: LSI MegaRAID 9260-4i (Cisco product ID R200-PL004, LSI 6G MegaRAID 9260-4i • card w/512MB write cache) LSI MegaRAID 9280-4i4e (Cisco product ID UCSC-RAID-C-4i4e, LSI 9280-4i4e) •...
  • Page 84 The LSIiBBU08 BBU requires minimum LSI MegaRAID card firmware 2.120.133.1322 or later to be Note recognized. You can use the Cisco Host Upgrade Utility to upgrade your LSI MegaRAID card firmware. Obtain the Cisco Host Upgrade Utility 1.4.1 or later package (including drivers) by navigating from the Cisco.com software download site: http://www.cisco.com/cisco/software/navigator.html...
  • Page 85 Maintaining the Server Installing or Replacing Components Figure 3-27 Removing and Replacing an LSIiBBU06 BBU BBU bracket on fan tray BBU (connector J2 is on the underside) Securing screws (two) Cisco UCS C200 Server Installation and Service Guide 3-45 OL-20732-02...

  • Page 86: Installing A Mezzanine Card

    Reconnect the cable harness to the connector on the top of the mezzanine card. Replace the top cover. Replace the server in the rack, replace power cords and any other cables, and then power on the server by pressing the Power button. Cisco UCS C200 Server Installation and Service Guide 3-46 OL-20732-02...
  • Page 87 Chapter 3 Maintaining the Server Installing or Replacing Components Figure 3-28 Removing and Replacing a Mezzanine Card Mezzanine card retaining posts (three) Mezzanine card Cisco UCS C200 Server Installation and Service Guide 3-47 OL-20732-02...
  • Page 88 Chapter 3 Maintaining the Server Installing or Replacing Components Cisco UCS C200 Server Installation and Service Guide 3-48 OL-20732-02...

  • Page 89: Appendix

    A P P E N D I X Technical Specifications This appendix lists the technical specifications for the Cisco UCS C200 server and includes the following sections: Physical Specifications, page A-1 • Environmental Specifications, page A-2 • Power Specifications, page A-2 •...

  • Page 90: Environmental Specifications

    Power supply output voltage Main power: 12 VDC Standby power: 5 VDC You can get more specific power information for your exact server configuration by using the Cisco UCS Power Calculator: http://www.cisco.com/assets/cdc_content_elements/flash/dataCenter/cisco_ucs_power_calculator/ Cisco UCS C200 Server Installation and Service Guide...

  • Page 91: Appendix

    USB ports for a keyboard and mouse. With this cable, you can create a direct connection to the operating system and the BIOS running on the server. This server supports the following Cisco components and part numbers. Supported Components...

  • Page 92: Supported Power Cords And Plugs

    Power Cord, 250 VAC 10 A MP232 Plug Switzerland CAB-9K10A-UK Figure B-10 Power Cord, 250 VAC 10 A BS1363 Plug (13 A fuse) United Kingdom CAB-AC-250V/13A Figure B-11 Power Cord, 250 VAC 13 A IEC60320 Plug North America Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 93: Ac Power Cord Illustrations

    Length: 8.2 ft Plug: EL 219 (IRAM 2073) Connector: EL 701 (IEC60320/C13) Figure B-3 CAB-9K10A-AU Cordset rating: 10 A, 250 V/500V Length: 2500mm Connector: Plug: EL 701C EL 206 (IEC 60320/C15) A.S. 3112-2000) Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 94 Cordset rating: 10A/16 A, 250 V Length: 8 ft 2 in. (2.5 m) Plug: M2511 Connector: VSCC15 Figure B-6 SFS-250V-10A-ID Cordset rating 16A, 250V Plug: (2500mm) EL 208 Connector: EL 701 Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 95 Length: 8 ft 2 in. (2.5 m) Plug: Connector I/3G C15M (CEI 23-16) (EN60320/C15 ) Figure B-9 CAB-9K10A-SW Cordset rating: 10 A, 250 V Length: 8 ft. 2 in (2.5 m) Plug: MP232-R Connector: IEC 60320 C15 Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 96 Cordset rating 13A, 250V (6.6 feet) (79±2m) Connector: Plug: EL 701 EL312MoldedTwistlock (IEC60320/C13) (NEMA L6-20) Figure B-12 CAB-N5K6A-NA Cordset rating: 10 A, 250 V Length: 8.2 ft Plug: NEMA 6-15P Connector: IEC60320/C13 Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 97 Supported Power Cords and Plugs Figure B-13 CAB-9K12A-NA Cordset rating 13A, 125V (8.2 feet) (2.5m) Plug: Connector: NEMA 5-15P IEC60320/C15 Figure B-14 CAB-C13-C14-JMPR, Jumper Power Cord Cordset rating 10A, 250V (686mm) Connector: Plug: HS10S SS10A Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 98 Appendix B Cable and Power Cord Specifications Supported Power Cords and Plugs Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 99: Appendix

    • For More Information, page C-7 • Supported RAID Controllers and Required Cables The Cisco UCS C200 Large Form-Factor (LFF) and C200 Small Form-Factor (SFF) server models support the RAID controller options and cable requirements shown in Table C-1 Table C-2.

  • Page 100: A P P E N D I X C Raid Controller Considerations

    1. The integrated ICH10R controller must be enabled in the BIOS. This controller is not compatible for use with VMWare ESX/ESXi Server software in any generation or version of the Cisco UCS C200 server. 2. You can mix SAS and SATA drives when using a 1068E-based controller. However, you cannot mix SAS and SATA drives within a volume.

  • Page 101: Enabling The Mezzanine Card Raid Controller In The Bios

    C-1. The blue line indicates the recommended cable routing path from the backplane to the possible controller locations. Note The Cisco UCS C200 SFF server is shown, with an eight-drive backplane. The LFF server has a four-drive backplane. Figure C-1...

  • Page 102: Cisco Ucs C200 Lff Server Cabling

    Cisco UCS C200 SFF Server Cabling The cable connections required for each type of controller are as follows: Two SAS cables (R200-SASCBL) are shipped with the Cisco UCS C200 SFF server (but not with the Note LFF version of the server). You can order a set of two spare SAS cables (Cisco PID UCSC-CBL-I2F1).

  • Page 103: How To Disable Quiet Boot For Cimc Firmware Earlier Than Release 1.2(1)

    On the Main page of the BIOS Setup utility, set Quiet Boot to Disabled. This allows non-default Step 3 messages, prompts, and POST messages to display during bootup instead of the Cisco logo screen. Press F10 to save your changes and exit the utility.

  • Page 104: Restoring Raid Configuration After Replacing A Raid Controller

    Note you in setting up some RAID configurations for your drives. This utility is shipped with new servers on CD. You can also download the ISO from Cisco.com. See the user documentation for this utility at the following URL: http://www.cisco.com/en/US/docs/unified_computing/ucs/sw/ucsscu/user/guide/20/SCUUG20.html Restoring RAID Configuration After Replacing a RAID Controller When you replace a RAID controller, the RAID configuration that is stored in the controller is lost.

  • Page 105: For More Information

    Cisco UCS Servers RAID Guide. Full LSI documentation is also available: • LSI MegaRAID SAS Software User’s Guide (for LSI MegaRAID) http://www.cisco.com/en/US/docs/unified_computing/ucs/3rd-party/lsi/mrsas/userguide/LSI_MR_SAS_SW_UG.pdf LSI SAS2 Integrated RAID Solution User Guide (for LSI SAS1064E) • http://www.cisco.com/en/US/docs/unified_computing/ucs/3rd-party/lsi/irsas/userguide/LSI_IR_SAS_UG.pdf Cisco UCS C200 Server Installation and Service Guide OL-20732-02...
  • Page 106 Appendix C RAID Controller Considerations For More Information Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

  • Page 107: Appendix

    The Cisco UCS integration instructions have been moved to the integration guides found here: Cisco UCS C-Series Server Integration with UCS Manager Guides Refer to the guide that is for the version of Cisco UCS Manager that you are using. Cisco UCS C200 Server Installation and Service Guide...

  • Page 108: A P P E N D I X D Installation For Cisco Ucs Integration

    Appendix D Installation for Cisco UCS Integration Cisco UCS C200 Server Installation and Service Guide OL-20732-02...

Table of Contents