Registering Aliases - Cisco TelePresence Video Communication Server Administrator's Manual

Hide thumbs Also See for TelePresence Video Communication Server:
Table of Contents

Advertisement

Field
Description
HTTPS
Controls certificate revocation list checking
certificate
of the certificate supplied by the policy
revocation
service.
list (CRL)
When enabled, the server's X.509
checking
certificate is checked against the HTTPS
certificate revocation list.
Server
The IP address or Fully Qualified Domain
address 1 -
Name (FQDN) of the service.
3
Path
The URL of the service.
Status path
The path for obtaining the remote service
status.
Username
The username used by the VCS to log in
and query the service.
Password
The password used by the VCS to log in and
query the service.
The maximum plaintext length is 30
characters (which is subsequently
encrypted).
Default CPL The default CPL used by the VCS if the
policy service is unavailable.
See
About policy services
services.

Registering aliases

After the
device authentication
attempt to register its aliases with the VCS.
H.323
When registering, the H.323 endpoint presents the VCS with one or more of the following:
one or more H.323 IDs
n
one or more E.164 aliases
n
one or more URIs
n
Users of other registered endpoints can then call the endpoint by dialing any of these aliases.
You are recommended to register your H.323 endpoints using a URI. This facilitates interworking
n
between SIP and H.323, as SIP endpoints register using a URI as standard.
You are recommended to not use aliases that reveal sensitive information. Due to the nature of
n
H.323, call setup information is exchanged in an unencrypted form.
Cisco VCS Administrator Guide (X6.1)
for more information about how the VCS communicates with external policy
process (if required) has been completed, the endpoint will then
Registration control
Usage tips
Use the
CRL management
configure how the VCS uploads CRL
files.
For resiliency, up to three server
addresses can be supplied.
This defaults to <reject
status='403'
reason='Service
Unavailable'/> but you could
change it, for example, to redirect to an
answer service or recorded message.
page to
Page 66 of 401

Advertisement

Table of Contents
loading

Table of Contents