Table of Contents
Advertisement
Logging into the Web Interface and Verifying Connectivity
Logging into the Web Interface and Verifying
Connectivity
Note
Step 1
Step 2
Step 3
Installation and Configuration Guide for the CiscoWorks Wireless LAN Solution Engine
3-12
Disable pop-up blocker software while using the WLSE web interface.
To verify HTTP and HTTPS connectivity, connect to the WLSE using a
supported, properly configured Web browser and perform the following steps:
To verify HTTP connectivity, enter the system IP address, followed by :1741 (the
default port number).
For example, if the system IP address is 209.165.202.128, enter
http://209.165.202.128:1741.
If a login dialog box appears, you have connectivity.
To verify HTTPS connectivity, enter the system IP address, prefixed by https.
Do not use a port number in the URL.
For example, if the system IP address is 209.165.202.128, enter
https://209.165.202.128.
If a login dialog box appears, you have connectivity.
Enter the user name admin and the password you created during setup in the login
dialog box. The WLSE home page appears.
Chapter 3
Setting Up the WLSE
78-16778-01
Advertisement
Table of Contents
