Registration Details; Call Status - Cisco TelePresence Video Communication Server Administrator's Manual

Field Description
Creation The date and time at which the registration was accepted.
time If an NTP server has not been configured, this will say Time not set.
End The date and time at which the registration was terminated.
time
Duration The length of time that the registration was in place.
Peer Identifies the cluster peer to which the alias was registered.
Reason The reason why the registration was terminated.
Filtering the list
To limit the list of registrations, enter one or more characters in the Filter field and click Filter. Only
those registrations that contain (in any of the displayed fields) the string you entered will be shown.
To return to the full list of registrations, click Reset.

Registration details

The Registration details page
alias or Status > Registrations >
of a single registration. The exact details shown here depend on the device's protocol, and whether the
registration is still current.
Unregistering and blocking devices
Click Unregister to unregister the device. Note that the device may automatically re-register after a
n
period of time, depending on its configuration. To prevent this, you must also use a
restriction policy such as an Allow List or Deny List.
Click Unregister and block to unregister the device and add the alias to the
n
preventing the device from automatically re-registering. (This option is only available if the
Restriction policy has been set to Deny List.)

Call status

Call status
The Call status page (Status > Calls >
devices registered with the VCS, or that are passing through the VCS. If the VCS is part of a cluster,
all calls taking place through any VCS in the cluster are shown.
The following information is displayed:
Field Description
Start time The date and time when the call was placed.
Source The alias of the device that placed the call.
Destination The alias dialed from the device. This may be different from the alias to which the call
was placed, which may have been transformed (due to pre-search transforms, zone
transforms or User Policy).
Cisco VCS Administrator Guide (X6.1)
(Status > Registrations > By
History, then click on the registration name) shows the particulars
Calls) lists all the calls currently taking place to or from
Overview and status information
device, Status > Registrations > By
registration
Deny List page, thus
Page 32 of 401