Using The Web Interface - Cisco TelePresence Administrator's Manual

Using the web interface

Configuration of the VCS is normally carried out through the web interface.
To use the web interface:
1. Open a browser window and in the address bar type either:
the IP address of the system
l
the FQDN of the system
l
2. Click Administrator Login.
(This step does not apply if the VCS is using the
account data.)
3. Enter a valid administrator Username and Password and click Login (see the
details on setting up administrator accounts). You are presented with the
Note that when logging in using the VCS web interface, you may receive a warning message regarding the
VCS's security certificate. This can safely be ignored.
A command line interface
Required fields
All mandatory fields on web pages are indicated by a red star
Supported browsers
The VCS web interface is designed for use with Internet Explorer 7, 8 or 9, Firefox 3 or later, or Chrome. Later
versions of these browsers may also work, but are not officially supported. It may work with Opera and
Safari, but you could encounter unexpected behavior.
JavaScript and cookies must be enabled to use the VCS web interface.
Cisco VCS Administrator Guide (X7.2)
is also available.
TMS Provisioning Extension services
Overview
.
Introduction
to provide user
Login accounts section for
page.
Page 17 of 498