Configuring Call Policy Rules Using The Web Interface - Cisco TelePresence Video Communication Server Administrator's Manual

Hide thumbs Also See for TelePresence Video Communication Server:
Table of Contents

Advertisement

Field
Description
Default CPL The default CPL used by the VCS if the
policy service is unavailable.
See
About policy services
services.

Configuring Call Policy rules using the web interface

The Call Policy rules page
(rather than uploaded via a CPL file) Call Policy rules currently in place and allows you to create, edit
and delete rules. It provides a mechanism to set up basic Call Policy rules without having to write and
upload a CPL script.
Note: you cannot use the Call Policy rules page to configure Call Policy if a CPL file is already in
place. If this is the case, on the Call Policy configuration page
>
Configuration) you will have the option to Delete uploaded file. Doing so will delete the existing
Call Policy that was put in place using a CPL script, and enable use of the Call Policy rules page for
Call Policy configuration.
Each rule specifies the Action to take for all calls from a particular Source alias to a particular
Destination alias. If you have more than one rule, you can Rearrange the order of priority in which
these rules are applied.
The configurable options are:
Field
Description
Source
The alias that the calling endpoint used to identify itself when
pattern
placing the call. If this field is blank, the policy rule applies to all
incoming calls from unauthenticated users, meaning calls
where the endpoint making the call is not either:
locally registered and authenticated with the VCS, or
n
registered and authenticated to a neighbor which in turn has
n
authenticated with the local VCS
Destination
The alias that the endpoint dialed to make the call.
pattern
Cisco VCS Administrator Guide (X6.1)
for more information about how the VCS communicates with external policy
(VCS configuration > Call Policy >
Dial plan and call processing
Usage tips
This defaults to <reject
status='403'
reason='Service
Unavailable'/> but you could
change it, for example, to redirect to an
answer service or recorded message.
Rules) lists the web-configured
(VCS configuration > Call Policy
Usage tips
See the Call
Policy and
authentication
section for more
information about
unauthenticated
users and Call
Policy.
This field supports
regular
expressions.
This field supports
regular
expressions.
Page 133 of 401

Advertisement

Table of Contents
loading

Table of Contents