Cisco TelePresence Video Communication Server Administrator's Manual page 239

Hide thumbs Also See for TelePresence Video Communication Server:
Table of Contents

Advertisement

Event
Description
Directory
The TMS Agent is shutting down.
Service
Shutting Down
Error Response
The TURN server has sent an error message to a client (using STUN
Sent
protocol).
Eventlog
An operator cleared the Event Log.
Cleared
External Server
Communication with an external server failed unexpectedly. The Detail
Communication
event parameter should differentiate between "no response" and "request
Failure
rejected". Servers concerned are:
DNS
n
LDAP servers
n
Neighbor Gatekeeper
n
NTP servers
n
Peers
n
FindMe Search
A search of the FindMe database has failed, for example due to no alias
Failed
being provided.
FindMe
FindMe user accounts have been migrated across clusters. The Detail
Transfer
event parameter provides additional details.
Hardware
There is an issue with the VCS hardware. If the problem persists, contact
Failure
your Cisco support representative.
License Limit
Licensing limits for a given feature have been reached. The Detail event
Reached
parameter specifies the facility/limits concerned. Possible values for the
detail field are:
Non Traversal Call Limit Reached
n
Traversal Call Limit Reached
n
If this occurs frequently, you may want to contact your Cisco representative
to purchase more licenses.
Message
An incoming RAS message has been received.
Received
Message
An incoming RAS NSM Keepalive, H.225, H.245 or a RAS message
Received
between peers has been received.
Message
(SIP) An incoming message has been received.
Received
Message
This could be for one of two reasons:
If authentication is enabled and an endpoint has unsuccessfully
Rejected
n
attempted to send a message (such as a registration request) to the
VCS. This could be either because the endpoint has not supplied any
authentication credentials, or because its credentials do not match those
expected by the VCS.
Clustering is enabled but bandwidth across the cluster has not been
n
configured identically, and the VCS has received a message relating to
an unknown peer, link, pipe, subzone or zone.
Cisco VCS Administrator Guide (X6.1)
Reference material
Level
1
3
1
1
1
1
1
1
2
3
4
1
Page 239 of 401

Advertisement

Table of Contents
loading

Table of Contents