Cisco TelePresence Video Communication Server Administrator's Manual page 386

line per address from DNS lookup}
TraversalClient: {Visible if Type is
TraversalClient}
Peer [1..6]:
H323: {visible if H323 Mode=On for Zone}
response from gatekeeper/DNS resolution failed/Invalid
alias/Authentication Failed/Invalid IP address>
line per address from DNS lookup}
SIP: {Visible if SIP Mode=On for Zone}
response from neighbor/ DNS resolution failed>
line per address from DNS lookup}
TraversalServer: {visible if Type is
TraversalServer}
SIP:
Port: <Active/Inactive>
H323:
Port: <Active/Inactive>
Peer [1..6]:
H323: {visible if H323 Mode=On for Zone}
line per address from DNS lookup}
SIP: {visible if SIP Mode=On for Zone}
line per address from DNS lookup}
Calls: {0..900 entries}
Call [0..900]:
CallID: <S: 1,255>
Cisco VCS Administrator Guide (X6.1)
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No
Address: <IPv4Addr/IPv6Addr> {One Address
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Status: <Unknown/Active/Failed>
Cause: {visible if Status is Failed} <No
Address: <IPv4Addr/IPv6Addr> {One Address
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Status: Active
Address: <IPv4Addr/IPv6Addr> {One Address
Port: <1..65534>
LastStatusChange: <Time not set/Date Time>
Reference material
Page 386 of 401