About Provisioning (Starter Pack); Starter Pack; Device Authentication; Phone Book Support - Cisco TelePresence Video Communication Server Administrator's Manual

details of accounts that are not managed in your cluster. See
information.

About provisioning (Starter Pack)

The VCS's provisioning server provides basic device provisioning for a range of endpoint device
types, including Movi users, without the need for TMS.
The Starter Pack option key must be installed to use basic device provisioning. It cannot be used in
combination with Device Provisioning through the TMS Agent and TMS Provisioning Directory. Note
that the Starter Pack option key is designed for single box deployments and is only available as a pre-
configured factory setting.

Starter Pack

The Starter Pack is suitable for small enterprises. It provides basic VCS functionality and includes the
following features:
Expressway
n
FindMe
n
The following license restrictions apply by default:
50 registrations
n
5 calls (any combination of traversal and non-traversal calls); extra call license option keys can be
n
added if required
900 TURN relays
n
When the Starter Pack option key is installed the Presence Server and FindMe are enabled by default.

Device authentication

The provisioning server supports
authenticated against the VCS's local authentication database (or the LDAP directory if remote
authentication is selected) when they attempt a provisioning request and when they register with the
VCS.

Phone book support

Provisioned devices are served a phone book directory of user accounts.

Configuring provisioning

The Provisioning page
server.
The server is automatically enabled when the Starter Pack option key is installed.
You can monitor the provisioning server on the
Bandwidth limits
The Bandwidth limits section lists each supported device type and lets you choose whether or not to
enable the provisioning of bandwidth limits for that device.
If you enable the bandwidth limits option for a device type you can then configure the maximum
incoming and outgoing bandwidth (in kbps) values to set on the provisioned devices.
Cisco VCS Administrator Guide (X6.1)
device authentication. Provisioned devices' credentials can be
(Applications > Provisioning) is used to configure the VCS's
Provisioning status
Clustering and FindMe for more
page.
Applications
provisioning
Page 191 of 401