Bandwidth Configuration - Cisco TelePresence Video Communication Server Administrator's Manual

Bandwidth configuration

The Bandwidth configuration page
specify how the VCS behaves in situations when it receives a call with no bandwidth specified, and
when it receives a call that requests more bandwidth than is currently available.
The options are:
Field Description
Default call The bandwidth value to be used for calls for which
bandwidth no bandwidth value has been specified by the
(kbps) system that initiated the call.
This value cannot be blank. The default value is
384kbps.
Downspeed Determines what happens if the per-call
per call bandwidth restrictions on a subzone or pipe mean
mode that there is insufficient bandwidth available to
place a call at the requested rate.
On: the call will be downspeeded.
Off: the call will not be placed.
Cisco VCS Administrator Guide (X6.1)
(VCS configuration > Bandwidth >
Bandwidth control
Configuration) is used to
Usage tips
Usually, when a call is initiated
the endpoint will include in the
request the amount of bandwidth
it wants to use.
Page 157 of 401