Cisco TelePresence Video Communication Server Administrator's Manual page 260

Hide thumbs Also See for TelePresence Video Communication Server:
Table of Contents

Advertisement

to verify the server's identity. After the certificate has been created you will need to install the following
three files associated with the certificate onto the LDAP server:
the certificate for the LDAP server
n
the private key for the LDAP server
n
the certificate of the Certificate Authority (CA) that was used to sign the LDAP server's certificate
n
All three files should be in PEM file format.
The LDAP server must be configured to use the certificate. To do this:
Edit /etc/openldap/slapd.conf and add the following three lines:
n
TLSCACertificateFile <path to CA certificate>
TLSCertificateFile <path to LDAP server certificate>
TLSCertificateKeyFile <path to LDAP private key>
The OpenLDAP daemon (slapd) must be restarted for the TLS settings to take effect.
To configure the VCS to use TLS on the connection to the LDAP server you must upload the CA's
certificate as a trusted CA certificate. This can be done on the VCS by navigating to:
Certificate management > Security
Cisco VCS Administrator Guide (X6.1)
certificates.
Reference material
Maintenance >
Page 260 of 401

Advertisement

Table of Contents
loading

Table of Contents