Cisco TelePresence Video Communication Server Administrator's Manual page 298

Reference material
Ethernet [1..2] IP V6 Address: <S: 0, 39>
Specifies the IPv6 address of the specified LAN port. Note: you must restart the system for any changes to take
effect.
Example: xConfiguration Ethernet 1 IP V6 Address: "2001:db8::1428:57ab"
Ethernet [1..2] Speed: <Auto/10half/10full/100half/100full/1000full
Sets the speed of the Ethernet link from the specified LAN port. Use Auto to automatically configure the speed.
Note: you must restart the system for any changes to take effect.
Default: Auto
Example: xConfiguration Ethernet 1 Speed: Auto
ExternalManager Address: <S: 0, 128>
Sets the IP address or Fully Qualified Domain Name (FQDN) of the external manager.
Example: xConfiguration ExternalManager Address: "192.168.0.0"
ExternalManager Path: <S: 0, 255>
Sets the URL of the external manager.
Default: tms/public/external/management/SystemManagementService.asmx
Example: xConfiguration ExternalManager Path:
"tms/public/external/management/SystemManagementService.asmx"
ExternalManager Protocol: <HTTP/HTTPS>
The protocol used to connect to the external manager.
Default: HTTP
Example: xConfiguration ExternalManager Protocol: HTTP
ExternalManager Server Certificate Verification Mode: <On/Off>
Controls whether the certificate presented by the external manager is verified.
Default: On
Example: xConfiguration ExternalManager Server Certificate Verification Mode: On
H323 Gatekeeper AutoDiscovery Mode: <On/Off>
Determines whether or not the VCS responds to gatekeeper discovery requests from endpoints.
Default: On
Example: xConfiguration H323 Gatekeeper AutoDiscovery Mode: On
H323 Gatekeeper CallSignaling PortRange End: <1024..65534>
Specifies the upper port in the range to be used by calls once they are established.
Default: 19999
Example: xConfiguration H323 Gatekeeper CallSignaling PortRange End: 19999
Cisco VCS Administrator Guide (X6.1) Page 298 of 401