Acs Config-Web-Interface; Acs Delete Core - Cisco CSACS-1121-K9 Reference Manual

Appendix A ACS Command Reference

acs config-web-interface

To enable or disable an interface for ACS configuration web, use the acs config-web-interface
command in the EXEC mode.
Syntax Description migration | ucp | view (Optional) Specify one of the interfaces to enable or disable that specific
enable
disable
Defaults
Enabled.
Command Modes EXEC
Usage Guidelines Enables or disables an interface to migrate the ACS database and change the user password through the
CLI.
If you do not want to migrate your ACS database or change the user password, Cisco recommends that
you disable these interfaces.
Examples Example 1
acs/admin# acs config-web-interface migration enable
acs/admin#
Example 2
acs/admin# acs config-web-interface disable
acs/admin#
Related Commands Command
show acs-config-web-interface

acs delete core

To delete an ACS run-time core file or JVM core log, use the acs delete core command in the EXEC
mode.
OL-18996-01
acs config-web-interface [migration | ucp | view] {enable | disable}
interface alone.
Enables the interface for ACS migration and password change for the user.
Disables the interface for ACS migration and password change for the user.
acs delete core {filename}
Description
Indicates whether the ACS configuration web interface is enabled or
disabled.
CLI Reference Guide for the Cisco Secure Access Control System 5.1
EXEC Commands
A-13