Cisco TelePresence Video Communication Server Administrator's Manual page 306

Reference material
Login Remote LDAP Server FQDNResolution: <AddressRecord/SRVRecord>
Sets how the LDAP server address is resolved if specified as an FQDN.
AddressRecord: DNS A or AAAA record lookup.
SRVRecord: DNS SRV record lookup.
Default: AddressRecord
Example: xConfiguration Login Remote LDAP Server FQDNResolution: AddressRecord
Login Remote LDAP Server Port: <1..65534>
Sets the IP port of the LDAP server to use when making LDAP queries. Typically, non-secure connections use
389 and secure connections use 636.
Default: 389
Example: xConfiguration Login Remote LDAP Server Port: 389
Login Remote LDAP VCS BindDN: <S: 0,255>
Sets the user distinguished name to use when binding to the LDAP server.
Example: xConfiguration Login Remote LDAP VCS BindDN: "VCSmanager"
Login Remote LDAP VCS BindPassword: <S: 0,122>
Sets the password to use when binding to the LDAP server. The maximum plaintext length is 60 characters,
which is then encrypted.
Example: xConfiguration Login Remote LDAP VCS BindPassword: "password123"
Login Remote LDAP VCS BindUsername: <S: 0,255>
Sets the username to use when binding to the LDAP server. Only applies if using SASL.
Example: xConfiguration Login Remote LDAP VCS BindUsername: "VCSmanager"
Login Remote Protocol: <LDAP>
The protocol used to connect to the external directory.
Default: LDAP
Example: xConfiguration Login Remote Protocol: LDAP
Login User Groups Group [1..15] Access: <None/ReadWrite>
Defines the access level for members of the specified user group.
None: no access allowed.
ReadWrite: configuration can be viewed and changed.
Default: ReadWrite
Example: xConfiguration Login User Groups Group 1 Access: ReadWrite
Cisco VCS Administrator Guide (X6.1) Page 306 of 401