Cisco TelePresence Video Communication Server Administrator's Manual page 345

Reference material
Zones Zone [1..1000] Neighbor SIP UPDATE Strip Mode: <On/Off>
Determines whether or not the VCS will strip the UPDATE method from the Allow header of all requests and
responses going to and from this zone.
Default: Off
Example: xConfiguration Zones Zone 3 Neighbor SIP UPDATE Strip Mode: Off
Zones Zone [1..1000] Neighbor ZoneProfile: <Default/Custom/MicrosoftOCS2007/
CiscoUnifiedCommunicationsManager/NortelCS1000/AdvancedMediaGateway/NonRegisteringDevice>
Determines how the zone's advanced settings are configured.
Default: uses the factory defaults.
Custom: allows you to configure each setting individually.
Preconfigured profiles: alternatively, choose one of the preconfigured profiles to automatically use the
appropriate settings required for connections to that type of system.
Default: Default
Example: Zones Zone 3 Neighbor ZoneProfile: Default
Zones Zone [1..1000] SIP Mode: <On/Off>
Determines whether SIP calls will be allowed to and from this zone.
Default: On
Example: xConfiguration Zones Zone 3 SIP Mode: On
Zones Zone [1..1000] TraversalClient Authentication Mode:
<DoNotCheckCredentials/TreatAsAuthenticated/CheckCredentials>
Controls how the VCS authenticates incoming messages from this zone and whether they are subsequently
treated as authenticated, unauthenticated, or are rejected. The behavior varies for H.323 messages, SIP
messages that originate from a local domain and SIP messages that originate from non-local domains. See the
Administrator Guide for full details about each of the Authentication Policy options.
Default: DoNotCheckCredentials
Example: xConfiguration Zones Zone [1..1000] TraversalClient Authentication Mode:
DoNotCheckCredentials
Zones Zone [1..1000] TraversalClient Authentication Password: <S: 0,215>
The password used by the VCS when connecting to the traversal server. The maximum plaintext length is 128
characters, which is then encrypted.
Example: xConfiguration Zones Zone 1 TraversalClient Authentication Password:
"password123"
Zones Zone [1..1000] TraversalClient Authentication UserName: <S: 0,128>
The user name used by the VCS when connecting to the traversal server.
Example: xConfiguration Zones Zone 1 TraversalClient Authentication UserName:
"clientname"
Cisco VCS Administrator Guide (X6.1) Page 345 of 401