Cisco TelePresence Video Communication Server Administrator's Manual page 309

Reference material
Policy FindMe CallerID: <FindMeID/IncomingID>
Determines how the source of an incoming call is presented to the callee.
IncomingID: displays the address of the endpoint from which the call was placed.
FindMeID: displays the FindMe ID associated with the originating endpoint's address.
Default: IncomingID
Example: xConfiguration Policy FindMe CallerId: FindMeID
Policy FindMe Mode: <Off/On/ThirdPartyManager>
Configures how the FindMe application operates.
Off: disables FindMe.
On: enables FindMe.
ThirdPartyManager: uses an off-box, third-party FindMe manager.
Default: Off
Example: xConfiguration Policy FindMe Mode: On
Policy FindMe Server Address: <S: 0, 128>
Specifies the IP address or Fully Qualified Domain Name (FQDN) of the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server Address:
"userpolicy.server.example.com"
Policy FindMe Server Password: <S: 0, 82>
Specifies the password used by the VCS to log in and query the remote FindMe Manager. The maximum
plaintext length is 30 characters, which will then be encrypted.
Example: xConfiguration Policy FindMe Server Password: "password123"
Policy FindMe Server Path: <S: 0, 255>
Specifies the URL of the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server Path: "service"
Policy FindMe Server Protocol: <HTTP/HTTPS>
Specifies the protocol used to connect to the remote FindMe Manager.
Default: HTTP
Example: xConfiguration Policy FindMe Server Protocol: HTTP
Policy FindMe Server UserName: <S: 0, 30>
Specifies the user name used by the VCS to log in and query the remote FindMe Manager.
Example: xConfiguration Policy FindMe Server UserName: "user123"
Cisco VCS Administrator Guide (X6.1) Page 309 of 401