Cisco TelePresence Video Communication Server Administrator's Manual page 322

Reference material
SNMP V3 Privacy Mode: <On/Off>
Enables or disables SNMP Version 3 privacy.
Default: On
Example: xConfiguration SNMP V3 Privacy Mode: On
SNMP V3 Privacy Password: <S: 0,215>
Sets SNMP Version 3 privacy password. Note: must be at least 8 characters.
Example: xConfiguration SNMP V3 Privacy Password: "password123"
SNMP V3 Privacy Type: <DES/AES>
Sets SNMP Version 3 privacy type.
Example: xConfiguration SNMP V3 Privacy Type: AES
SNMP V3 UserName: <S: 0,70>
Sets the username to use when using SNMP V3.
Example: xConfiguration SNMP V3 UserName: "user123"
SystemUnit AdminAccount [1..15] Access: <AccountDisabled/ReadOnly/ReadWrite/Auditor >
Defines the access level of an administrator user who can login to the VCS web interface.
AccountDisabled: no access allowed.
ReadOnly: configuration can only be viewed.
ReadWrite: configuration can be viewed and changed.
Auditor: allows access to the Event Log, Configuration Log and the Overview page only.
Default: ReadWrite
Example: xConfiguration SystemUnit AdminAccount 1 Access: ReadOnly
SystemUnit AdminAccount [1..15] Name: <S:0,25>
Defines the name of an administrator user who can login to the VCS web interface.
Example: xConfiguration SystemUnit AdminAccount 1 Name: "guest"
SystemUnit AdminAccount [1..15] Password: <S:0,65>
Defines the password of an administrator user who can login to the VCS web interface. The maximum plaintext
length is 16 characters, which will then be encrypted.
Example: xConfiguration SystemUnit AdminAccount 1 Password: "password123"
SystemUnit Maintenance Mode: <On/Off>
Sets the VCS into maintenance mode. New calls and registrations are disallowed and existing registrations are
allowed to expire.
Default: Off
Example: xConfiguration SystemUnit Maintenance Mode: Off
Cisco VCS Administrator Guide (X6.1) Page 322 of 401