Cisco TelePresence Video Communication Server Administrator's Manual page 304

Hide thumbs Also See for TelePresence Video Communication Server:
Table of Contents

Advertisement

Reference material
Log Server Address: <S: 0, 128>
A comma-separated list of IP addresses or Fully Qualified Domain Names (FQDNs) of the remote syslog
servers to where the Event Log is written. These servers must support the BSD syslog protocol. They cannot be
another VCS.
Example: xConfiguration Log Server Address: "syslog.server.example.com"
Login Administrator Groups Group [1..30] Access: <None/ReadOnly/ReadWrite/Auditor>
Defines the access level for members of the specified administrator group.
None: no access allowed.
ReadOnly: configuration can only be viewed.
ReadWrite: configuration can be viewed and changed.
Auditor: allows access to the Event Log, Configuration Log and the Overview page only.
Default: ReadWrite
Example: xConfiguration Login Administrator Groups Group 1 Access: ReadWrite
Login Administrator Groups Group [1..30] Name: <S: 0,128>
Defines the name of an administrator group that determines which access rights members of the group have
after they have been successfully authenticated to use the VCS.
Example: xConfiguration Login Administrator Groups Group 1 Name: "VCS_Admin"
Login Administrator Source: <Local/Remote>
Defines where administrator login credentials are authenticated before access is allowed to the VCS.
Remote: credentials are verified against an external credentials directory, for example Windows Active
Directory.
Local: credentials are verified against a local database stored on the VCS.
Default: Local
Example: xConfiguration Login Administrator Source: Local
Login Remote LDAP BaseDN Accounts: <S: 0,255>
Sets the Distinguished Name to use as the base when searching for administrator and user accounts.
Example: xConfiguration Login Remote LDAP BaseDN Accounts:
"ou=useraccounts,dc=corporation,dc=int"
Login Remote LDAP BaseDN Groups: <S: 0,255>
Sets the Distinguished Name to use as the base when searching for administrator and user groups.
Example: xConfiguration Login Remote LDAP BaseDN Groups:
"ou=groups,dc=corporation,dc=int"
Cisco VCS Administrator Guide (X6.1)
Page 304 of 401

Advertisement

Table of Contents
loading

Table of Contents