Configuring Call Policy Rules Using The Web Interface; Configuring Call Policy Using A Cpl Script - Cisco TelePresence Administrator's Manual

Configuring Call Policy rules using the web interface

The Call Policy rules page
than uploaded via a CPL file) Call Policy rules currently in place and allows you to create, edit and delete
rules. It provides a mechanism to set up basic Call Policy rules without having to write and upload a CPL
script.
You cannot use the Call Policy rules page to configure Call Policy if a CPL file is already in place. If this is the
case, on the Call Policy configuration
have the option to Delete uploaded file. Doing so will delete the existing Call Policy that was put in place
using a CPL script, and enable use of the
Each rule specifies the Action to take for all calls from a particular Source alias to a particular Destination
alias. If you have more than one rule, you can Rearrange the order of priority in which these rules are applied.
The configurable options are:
Field Description
Source The alias that the calling endpoint used to identify itself when placing the call. If
pattern this field is blank, the policy rule applies to all incoming calls from unauthenticated
users, meaning calls where the endpoint making the call is not either:
locally registered and authenticated with the VCS, or
n
registered and authenticated to a neighbor which in turn has authenticated with
n
the local VCS
Destination The alias that the endpoint dialed to make the call.
pattern
Action Whether or not a call that matches the source and destination is permitted.
Allow: if both the Source and Destination aliases match those listed, call
processing will continue.
Reject: if both the Source and Destination aliases match those listed, the call will
be rejected.
Rearrange Each combination of Source and Destination is compared, in the order shown on
the Call Policy rules
found, at which point the call policy is applied. To move a particular item to higher
or lower in the list, thus giving the rule a higher or lower priority, click on the
icons respectively.
Click on the rule you want to configure (or click New to create a new rule, or click Delete to remove a rule).

Configuring Call Policy using a CPL script

You can use CPL scripts to configure advanced Call Policy. To do this, you must first create and save the
CPL script as a text file, after which you upload it to the VCS. However, due to the complexity of writing CPL
Cisco VCS Administrator Guide (X7.2)
(VCS configuration > Call Policy >
page (VCS configuration > Call Policy >
Call Policy rules
page, with the details of the call being made until a match is
Dial plan and call processing
Rules) lists the web-configured (rather
Configuration) you will
page for Call Policy configuration.
Usage tips
See About
device
authentication
for more
information.
This field
supports
regular
expressions.
This field
supports
regular
expressions.
and
Page 188 of 498