List Of Tables; About This Manual - Microscan MS-7100 User Manual

List of Tables

Table 1-1 MS-7100/7180 Read Range and Scan Widths.................................. 1-3
Table 1-2 Cable Distances ................................................................................ 1-8
Table 1-3 Host 28-pin Connector Pin Assignments .......................................... 1-9
Table 1-4 Trigger Connector Pin Assignments ............................................... 1-11
Table 1-5 Power Connector Pin Assignments ................................................ 1-12
Table 2-1 Symbology Identifier Option Values................................................ 2-23
Table 2-2 Raster Settings ............................................................................... 2-37
Table 3-1 Summary of Serial Configuration Commands .................................. 3-2
Table 3-2 Protocol Commands ......................................................................... 3-6
Table 5-1 Operational Commands .................................................................... 5-2
Table A-1 ASCII Table with Control Characters ............................................... A-5
Table A-2 Troubleshooting .............................................................................. A-11
Table A-3 Multidrop Address Characters ........................................................ A-24
About the MS-7100/7180 Scanner
The MS-7100 and the MS-7180 are fixed-mount industrial laser diode scan-
ners enclosed in sealed cases. They employ brushless ball-bearing motors to
spin 14-sided mirrors at 1000 scans per second to read and decode barcode
labels at a wide variety of ranges. The MS-7180 includes a controllable step-
per motor and raster mirror to create a scan pattern over a broad two-dimen-
sional area.

About this Manual

This manual provides complete information on setting up, installing, and
configuring the MS-7100 and the MS-7180 industrial scanners.
Chapter 1 provides overall step-by-step instructions for setting up and installing
the scanner with specific "go to" references to other chapters and appendices.
Chapter 2 provides instructions for configuring the scanner by menu.
Chapter 3 provides instructions for configuring the scanner by serial command.
Chapter 4 provides instructions for using the Calibration Setup menu.
Chapter 5 describes the serial operational commands that can be sent from
the host.
For specifications, see appendix A. The appendices also include reference
tables as well as other useful information relating to bar coding and the
scanner.
Note: Bar code labels should meet minimum ANSI (American National
Standards Institute) standards as specified in ANSI Bar Code Print Quality
Guideline, X3.182-1990.
vi
MS-7100/7180 Industrial Scanner User's Manual