Microscan MS-7100 User Manual page 55

Allows you to specify the exact number of characters that the scanner will
recognize. Any code not having the prescribed length will be ignored by the
scanner. Available only when Fixed Code Length is enabled.
Codabar
Status
Default: Disabled
Options: Disabled, Enabled
Start & Stop Match
Default: Enabled
Options: Enabled, Disabled
Requires the Codabar start and stop characters (a, b, c, or d) to match
before a valid read can occur.
Start & Stop Output
Default: Enabled
Options: Enabled, Disabled
Allows the start and stop characters to be transmitted with bar code data.
Large Intercharacter Gap
Default: Disabled
Options: Disabled, Enabled
Allows the scanner to read labels with gaps between bar code characters exceeding
three times the narrow element width.
Fixed Code Length
Default: Disabled
Options: Disabled, Enabled
Used to increase data integrity by ensuring that only label length will be accepted.
Code Length
Default: 10
Options: 1 to 31
Allows you to specify the exact number of characters that the scanner will
recognize. Any code not having the prescribed length will be ignored by the
scanner. Available only when Fixed Code Length is enabled.
MS-7100/7180 Industrial Scanner User's Manual
Code Types Menu
2-25