Keystroke Entries; Approvals; Warning And Caution Summary; Safety Labels - Microscan MS-7100 User Manual

Keystroke Entries

Keystrokes to be entered from your terminal are highlighted in bold, as in
<D>, including a < left angle bracket symbol (unless redefined by Command
Start Character command) and followed by a > right angle bracket symbol.

Approvals

• CDRH (Center for Devices and Radiological Health)
• TüV (Technischer überwachungs-Verein)
• CE
• cUL (Underwriters Laboratories, Inc.)
• FCC (Federal Communications Commission) Part 15, Class A
• This Class A digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Cet Appareil numerique de la classe A respecte toutes les exigences du
Reglement sur le material broilleur du Canada.

Warning and Caution Summary

Caution: This equipment has been tested and found to comply with
CISPR 22 and with the limits for a Class A digital device, pursuant to part
15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radi-
ate radio frequency energy, and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely
to cause interference in which case the user will be required to correct the
interference at his or her own expense.
For connection to a Listed direct plug-in power unit marked Class II and
rated at 10 to 28 VDC unregulated power @10 watt maximum.

Safety Labels

Note: The safety labels will carry a CDRH Class II designation when
placed on an MS-7100 or MS-7180 with 670 nm visible light.
MS-7100/7180 Industrial Scanner User's Manual
vii