2
Verify Read Range
Table
1-1
shows readable ranges and maximum scan widths for specific
bar code density (narrow-bar-width) types. Use this table as a reference to
verify that the planned range for your label falls within one of the listed
ranges.
Table 1-1 MS-7100/7180 Read Range and Scan Widths
Read Range
Narrow-
Bar-Width
MS-7100
.020"
6" to 23" (15.2 to 58.4 cm)
.030"
4" to 34" (10.2 to 86.4 cm)
.040"
10" to 44" (25.4 to 112 cm)
.050"
10" to 55" (25.4 to 140 cm)
.010"
6" to 11" (15.2 to 27.9 cm)
.015"
5" to 16" (12.7 to 40.6 cm)
.020"
3" to 16" (7.6 to 40.6 cm)
.030"
4" to 20" (10.2 to 50.8 cm)
.040"
4" to 20" (10.2 to 50.8 cm)
.005"
2" to 4.25" (5.1 to 10.8 cm)
.0075"
2" to 5" (5.1 to 12.7 cm)
a. Read range is the distance of the label from the scanner (measured from the front of the scanner
bezel) in which the label can be reliably read. The distance between the minimum and maximum
ranges is the depth of field.
b. FIS (Final Instruction Sheet) option.
Note: Optimum read rates can be expected at the center of the depth of field (half-
way between minimum and maximum read range) for a given bar code density.
For information on label orientation, see
6.
MS-7100/7180 Industrial Scanner User's Manual
a
Maximum Scan Width
MS-7180
MS-7100
b
Low Density
4" to 20" (10.2 to 50.8 cm)
13" (33.0 cm)
2" to 32" (5.1 to 81.2 cm)
18" (45.7 cm)
8" to 42" (20.3 to 106.7 cm)
25" (63.5 cm)
8" to 50" (20.3 to 127 cm)
34" (86.4 cm)
High Density
4" to 8.5" (10.2 to 21.6 cm)
7.5" (19.1 cm)
3" to 13.5" (7.62 to 34.3 cm)
10.5" (26.7 cm)
1" to 14" (2.54 to 35.6 cm)
10.5" (26.7 cm)
2" to 18"(5.1 to 45.7 cm)
13.5" (34.3 cm)
4" to 18"(10.2 to 45.7 cm)
13.5" (34.3 cm)
Ultra High Density
1" to 3.5" (2.54 to 8.9 cm)
3.25" (8.3 cm)
1" to 3.5" (2.54 to 8.9 cm)
3.75" (9.5 cm)
Appendix C, "Orientation," on page A-
Verify Read Range
MS-7180
12" (30.5 cm)
16" (40.6 cm)
22.5" (57.2 cm)
31" (78.8 cm)
7" (17.8 cm)
9.5" (24.1 cm)
9.5" (24.1 cm)
13" (33 cm)
13" (33 cm)
2.25" (5.7 cm)
2.5" (6.4 cm)
1-3
Need help?
Do you have a question about the MS-7100 and is the answer not in the manual?