Installing Multiple Extension Units In Layers - Mitsubishi GT16 User Manual

8.1.2

Installing multiple extension units in layers

This section describes how to install another extension units on the extension units that has been installed on the GOT.
1.
Remove the connector cover and sticker from the installed extension units.
2.
Install the unit on the unit that has been installed.
3.
After installing the unit, fasten it by tightening the mounting screws (2 places) with tightening torque of 0.36
to 0.48N·m.
4.
When installing another extension unit on the unit that has been installed, implement the above operations
of step 1 to 3.When not installing an extension unit on the unit that has been installed, in order to avoid
receiving electrostatic, stick accessory stickers to cover the top of mounting screws.
Keep the connector cover fixed.
Keep the sticker stuck as it is.
8 - 2 8.1 Communication Unit
Accessory
stickers
Connector
cover
Connector cover
Sticker
Sticker