Mitsubishi GT16 User Manual page 171

(3) Wiring of GOT's FG cable and power line
Current status
Measure for the
cables installed
together
(4) Surge measures
PLC
Current status
Output
PLC
Measure for the
equipment
Output
without a surge
suppressor used
Entry area
Model name of the surge suppressor
GOT
LG FG
Power for the power equipment
GOT
LG FG
Power for the power equipment
C
R
AC
C
R
AC
The surge suppressor must be
attached close to the load
The FG cable and power line of the
GOT are installed together.
Separating the FG cable and power
line of the GOT in wiring reduces the
influence of noise.
A surge suppressor is used for the
wiring of the load such as MCCB,
electromagnetic contactor, relay,
solenoid valve, or induction motor.
L
(When a surge suppressor is used, fill
out the entry area below with the
surge suppressor model name and
the name of the equipment for which
the surge suppressor is used.)
Attaching the surge suppressor on
L
the cable close to the load can reduce
the influence of surge on the GOT.
Equipment name
10.1 GOT Restoration Sheet
9
Installed
together
Not installed
10
together
Effective
Ineffective
Used
Not used
Effective
Ineffective
10 - 7