(7) Depth dimensions for installing multiple stages
The following shows how to calculate the depth dimensions for installing multiple stages to the GOT.
When installing only the first stage , refer to the dimensions in App.1 (6).
1.
Select the GOT main unit coefficient from the following list.
E
F
2.
Select the option coefficient of the corresponding extension unit from the following list.
GT15-CFCD,
GT15-CFEX-C08SET
*1
GT16M-V4
,
GT16M-R2
GT15-QBUS,
GT15-QBUS2,
GT15-RS2-9P,
GT15-RS4-9S,
GT15-J71BR13,
GT15-J61BT13,
GT15-DIOR,
GT15-SOUT
*1
,
GT15-J71GP23-SX
GT16M-MMR
*1
When installing GT16M-V4, GT16M-R2, GT16M-V4R1, GT16M-ROUT, or GT16M-MMR, and GT15-J71GP23-SX or GT15-
J71GF13-T2, install GT15-J71GP23-SX or GT15-J71GF13-T2 in the second stage.
3.
Substitute the coefficients selected in step 1 and Step 2 to the following formula.
E (for 2 stages) = G (GOT main unit coefficient) + H (option coefficient) + H (option coefficient)
F (for 3 stages) = G (GOT main unit coefficient) + H (option coefficient) + H (option coefficient) + H (option
coefficient)
Example)
A calculation example is shown below.
F dimension (for 3 stages) for installing a multimedia unit (GT16M-MMR) in the first stage, a
CC-Link IE Controller Network communication unit (GT15-J71GP23-SX) in the second stage
and a CF card unit (GT15-CFCD) in the third stage of the GT1695M-X
F (for 3 stages) = -2 (main unit coefficient of GT1695M-X) + 35.5 (option coefficient of
GT16M-MMR) + 35.5 (GT15-J71GP23-SX) + 20.5 (GT15-CFCD)
= 89.5
The dimension after installing the above-mentioned extension units is F=89.5mm.
GOT side face
100(3.94) or more
Other equipment
Model name
*1
,
GT16M-V4R1
GT15-ABUS,
GT15-RS4-TE,
GT15-PRN,
*1
,
GT15-J71GF13-T2
GOT type
GT1695
GT1685
GT1675
GT1672
GT1665
GT1662
GT1655
*1
*1
,
GT16M-ROUT
,
GT15-ABUS2,
GT15-J71LP23-25,
GT15-DIO,
*1
9
10
G (main unit
coefficient)
-2(-0.08)
-3.5(-0.14)
-0.5(-0.02)
1.5(0.06)
Unit: mm (inch)
H (option
coefficient)
20.5(0.81)
21.5(0.85)
35.5(1.40)
Unit: mm (inch)
App - 10