Mitsubishi GT16 User Manual page 189

Error
Error message
code
527 Insufficient SRAM capacity.
Error in SRAM.
528
Failed to write data.
Data error in SRAM. Check the
529
battery life.
Improper monitor device.
530
Confirm monitor channel.
535 Cannot open image file.
Image file error or invalid file
536
format.
550 Invalid key code
Language switch failure. Install
560
optional functions.
Language switch failure. Load
561
expansion memory board.
Install the font appropriate for
562
the specified system language.
570 Recipe device points too large.
Capacity shortage of user
571
memory (RAM)
581 Abnormal Advanced recipe file
Cannot generate Advanced
582
recipe file.
Unable to save device value to
583
Advanced recipe file.
584 Advance recipe file save error
Advanced recipe file upload
585
error
Specified Advanced recipe
586
number does not exist.
The capacity for the SRAM user area is insufficient.
Confirm the available memory in the SRAM user area.
The error may be caused by a failure in the GOT main unit.
Contact your local Mitsubishi representative.
Error in SRAM data due to battery voltage low, etc.
Confirm the battery status.
The channel of the specified monitor target does not exist or the channel
is not the monitor target.
Confirm the monitor target channel of the screen data.
Confirm whether any file exists in the CF card or USB memory.
• Confirm whether image files in the CF card or USB memory are
normal.
• Confirm whether any image file of invalid format is stored.
The key code input execution trigger was ON with the non-target key
code set in the key code storage device.
Confirm the key code supported by the object where error occurs.
Switched language specifying KANJI other than Japanese without the
option OS installed.
Install the option OS.
Switched language specifying a KANJI region other than Japanese
without the option function board with add-on memory installed.
Install the option function board with add-on memory.
No font appropriate for the system language specified at the system
language switching is installed.
Install the appropriate font.
The number of the set points of the recipe device exceeds the specified
range.
Put the number of the set points of the recipe device within the specified
range.
There is no empty area/space in D drive.
Format the D drive in the memory to secure free area.
Advanced Recipe cannot be executed for advanced recipe file with
incorrect contents. Delete the advanced recipe file from the CF card or
USB memory.
Cannot generate advanced recipe file. Confirm the following and execute
recipe processing again.
Confirm whether the CF card or USB memory is installed.
Confirm whether the CF card access switch of the GOT is ON.
Confirm the available memory of the CF card or USB memory.
Unable to save device value to advanced recipe file.
Confirm the write-protection of the CF card or USB memory.
Confirm whether the attribute of saving file is for reading only.
An error has occurred during the advanced recipe file writing. Do not pull
out the CF card or USB memory while the Advanced Recipe is operating.
An error has occurred during the advanced recipe file reading.
Do not pull the CF card or USB memory out while the Advanced Recipe is
operating.
The advanced recipe of non-existing number is about to be executed.
Execute advanced recipe of existing number.
10.3 Error Message and System Alarm
Action
9
Channel No.
storage
10
10 - 25