Installing Multiple Extension Units In Layers - Mitsubishi GOT1000 GT15 User Manual

8.1.3

Installing multiple extension units in layers

This section describes how to install another extension units on the extension units that has been installed
on the GOT.
When no extension units is installed on the GOT, apply the steps in this section after installing an extension
units.
• Printer unit ( 8.3.2 Installing procedure)
• Video/RGB unit (
• Communication unit (
1 Remove the connector cover and sticker from the installed extension units.
2 Install the unit on the unit that has been installed.
3 After installing the unit, fasten it by tightening the mounting screws (2 places) with tightening torque of
0.36 to 0.48N·m.
8.4.2 Installing procedure)
8.1.2 Installing procedure)
8.1.3 Installing multiple extension units in layers
Connector cover
Sticker
8.1 Communication Unit
1
2
3
4
5
6
7
8
8
- 15