Mitsubishi GT16 User Manual page 96

(8) Video/RGB connection
(a) Video input
• Peel the sheath (with the length shown below) at both ends of the cable, and expose the shield braided
wire for grounding. (For grounding with cable clamps. (refer to Section 5.4.3.))
• Attach the ferrite core to the cable in the position as illustrated below.
GOT side
130 or less
(5.12)
(b) RGB input
• Wind cable shield material around the cable, and pull out the grounding braided wire of the cable shield
material with the length shown below.
• Attach the ferrite core to the cable in the position as illustrated below
GOT side
130 or less
(c) RGB output
• Wind cable shield material around the cable, and pull out the grounding braided wire of the cable shield
material with the length shown below.
• Attach the ferrite core to the cable in the position as illustrated below.
GOT side
5 - 19 5.4 Precautions for Wiring/Connecting the EMC Directive-Compliant Product
40
230 or less
(9.06)
(1.57)
Cable shield material
40
or less
(5.12) (1.57)
200 or less 20 or less
(7.87)
Ferrite Core
(ZCAT3035-1330)
Ferrite Core
(HF90T28X13X16)
40
(1.57)
Ferrite Core
(ZCAT3035-1330)
Grounding braided wire
(50mm)
Ferrite Core
(ZCAT3035-1330)
Cable shield material
Grounding braided wire (50mm)
(0.79)
Camcorder/
Vision sensor side
130 or less
(5.12)
400 or less
(15.75)
Vision sensor/
personal computer
40
130 or less
or less
(1.57) (5.12)
Unit : mm (inch)
external display side
20 or less 200 or less
(0.79)
Unit : mm (inch)
(7.87)
Unit : mm (inch)