Mitsubishi GT16 User Manual page 55

*1 Bright dots (always lit) and dark dots (unlit) may appear on a liquid crystal display panel due to its characteristics. It is impossible
to completely avoid this symptom, as the liquid crystal display comprises of a great number of display elements. Please note that
these dots appear due to its characteristic and are not caused by product defect.
*2 The GOT screen saving/backlight off function prevents images from becoming permanently etched on the display screen and
increases the backlight life.
*3 ROM in which new data can be written without deleting the written data.
*4 Compliant with IP67 when the USB environmental protection cover is attached with the
(Compliant with IP2X at the USB interface when a USB cable or USB memory is connected.) Note that this does not guarantee all
users' operation environment.
In addition, the GOT may not be available for use in the environment where oil or chemicals are splashed over for a long period or
where oil mist is filled.
*5 For using multiple extension units, a barcode reader or an RFID controller, the total current for the extension units, barcode reader
or RFID controller must be within the current that the GOT can supply.
For the current for the extension units, bar code reader or RFID controller, and the current that the GOT can supply, refer to the
following manual.
•GOT1000 Series Connection Manual for GT Works3 and a controller used
•GT Designer2 Version
*6 The function version A is not compatible with 10BASE-T.
For how to check the function version, refer to the following.
Appendix2 Confirming of Versions and Conformed Standards
*7 To use a stylus pen, the following specifications must be met.
• Material: polyacetal resin
• Tip radius: 0.8mm or more
*8 If the operating ambient temperature is other than 25°C, the error may become large.
*9 When using a stylus pen, it will be 100,000 times or more (operating force 0.98N max.)
Since the touch panel is a consumable product structurally, it may not be used even fewer than above, depending on the using
method and usage environment.
*10 A USB memory and a CF card that store more than 2GB are available for the GT16 with the following versions of OSs installed.
• BootOS version: 05.09.00AF or later
• Standard monitor OS version: 05.09.00 or later
With OSs earlier than the above versions, the GOT cannot correctly recognize the USB memory and the CF card that store more
than 2GB.
If the above versions of OSs are not installed, install the OSs on the GOT by using GT Designer3 with version 1.17T or later.
GT Designer2 version is not compatible with a USB memory and a CF card that store more than 2GB.
*11 For function version G or earlier, refer to the following.
Display angle of the display section: Left/Right 80 degrees, Top 60 degrees, Bottom 80 degrees
Backlight: Cold cathode fluorescent tube (replaceable)
Backlight life: Approx. 50,000 h or more
Screen Design Manual (2.8 Multi-channel Function)
3.2 Performance Specifications
part of the cover firmly pushed into.
3 - 7
1
2
3
4
5
6
7
8