For GT16-80SLTT, GT16-70SLTT and GT16-70VLTT
1.
Turn off the GOT.
2.
Disconnect the power supply cable and the communication cable. Remove the GOT from the control panel.
3.
Remove the right extension unit cover of the GOT.
Remove an extension unit, including a bus connection unit, if it is mounted.
4.
Remove eight fixing screws on the GOT rear face with a screwdriver.
5.
Remove the cable connector of the backlight from the connector of the GOT board.
(Expanded figure of part A in step 4)
When replacing the GT16-70SLTT/VLTT, remove the cables from the cable holder.
(When replacing the GT16-70SLTT/VLTT)
Top
Bottom
A
Top
Cable holder
9.6 Backlight Replacement
9
10
9 - 9