Mitsubishi GT16 User Manual page 125

POINT POINT POINT
(1) Installation position for a communication unit that occupies two extend interfaces
Install a communication unit that occupies two extend interfaces, such as the following, directly to the GOT
main unit.
It cannot be installed on the back stage of another communication unit.
If a video/RGB unit or multimedia unit has been installed, install the communication unit on the back stage of
that video/RGB unit or multimedia unit.
• Bus connection unit (GT15-QBUS2, GT15-ABUS2, GT15-75QBUS2L, GT15-75ABUS2L only)
• MELSECNET/H communication unit
• CC-Link IE Controller Network communication unit
• CC-Link IE Field Network communication unit
• CC-Link communication unit (GT15-J61BT13)
(2) Installing the GT15-75QBUSL, GT15-75QBUS2L, GT15-75ABUSL, GT15-75ABUS2L
These cannot be installed on the back stage of a video/RGB unit or multimedia unit. For bus connection, use
the GT15-QBUS, GT15-QBUS2, GT15-ABUS, or GT15-ABUS2.
(3) Removing a video/RGB unit, multimedia unit, bus connection unit (GT15-QBUS2, GT15-ABUS2),
MELSECNET/H communication unit, CC-Link IE Controller Network communication unit, CC-Link
communication unit (GT15-J61BT13)
Before removing the unit, unscrew the extension interface relay board fixing screws.
• Option unit
• Bus connection unit (GT15-QBUS2, GT15-ABUS2)
• MELSECNET/H communication unit
• CC-Link IE Controller Network communication unit
• CC-Link communication unit (GT15-J61BT13)
8.1 Communication Unit
1
2
3
4
5
6
7
8
8 - 3