Mitsubishi GT16 User Manual page 191

Error
Error message
code
Improper job files. Confirm job
611
setting.
Cannot access Logging Files
612
Check the memory card
613 Error in writing logfile
614 Error in reading logfile
Cannot connect to MES Server.
615
Check the Server.
Cannot connect to SNTP
616
Server. Check the Server.
630 Failed to save a video file.
Failed to save a video file on
631
network.
Error detected during
632
multimedia processing.
The version of the unit software
633
is not the latest.
No space remaining in the
634 multimedia CF card. Terminating
long time recording.
An error occurred in a FTP client
640
process.
The license key has not been
641
registered. Confirm your license.
800 Abnormal module status
801 Abnormal baton passing status
Abnormal cyclic transmission
802
status
803 Transient error
The cable on the IN side is
804 disconnected or is not
connected.
The contents for job files are unmatched with the settings for job files.
Check if there are mistakes in the settings on the setting screen.
Insert a CF card or USB memory.
Turn on the CF card access switch.
If the CF card or USB memory have unnecessary files, delete the files.
Insert a CF card or USB memory.
Turn on the CF card access switch.
Check if the CF card or USB memory is writable.
Insert a CF card or USB memory.
Turn on the CF card access switch.
Check if the CF card or USB memory is readable.
The server does not work normally or the connection path to the server is
made up incorrectly.
Check the operating conditions of the server.
Check the network to the server.
The settings for the SNTP server are wrong or the network to the SNTP
server is made up incorrectly.
Check the operating conditions of the STNP server.
Check the network to the SNTP server.
Check the CF card available area, installation status, cancellation of
write-protect, format status and number of saved files.
Check the activation status of personal computer linkage software in file
server, the setting of Ethernet FTP function of GOT, the network setting of
GOT and file server and the available area of CF card installed in the
GOT main unit.
Switch off the GOT and check the installation status of multimedia unit, or
change the multimedia unit.
Install the latest compatible multimedia unit software using the utility of
the GOT.
Change the CF card installed on the multimedia unit, or delete
unnecessary files.
Reconfigure the GOT (FTP client) setting.
Check the operating status and network line of the FTP server.
For the error details, check the GOT special register GS989 (FTP
communication error notification).
GOT1000 Series Gateway Functions Manual for GT Works3
Register the license number for the VNC server function on the GOT.
Refer to explanations of SB0020 on the applicable network manual.
For the CC-Link IE Field Network, refer to the manual of MELSEC-Q CC-
Link IE Field Network master/local module.
Refer to explanations of SB0047 on the applicable network manual.
Refer to explanations of SB0049 on the applicable network manual.
Refer to explanations of SB00EE on the applicable network manual.
Refer to explanations of SB0067 on the applicable network manual.
10.3 Error Message and System Alarm
Action
9
Channel No.
storage
10
10 - 27