Error Message And System Alarm; Error Contents Display - Mitsubishi GT16 User Manual

10.3 Error Message and System Alarm

This chapter describes the error message and system alarm displayed in the GOT.
As the error code and error message displaying functions when an error occurs at the GOT, controller or network, there
are two kinds: system alarm and advanced system alarm.
For details of the system alarm and advanced system alarm, refer to the following.
•GT Designer3 Version1 Screen Design Manual (Functions)
•GT Designer2 Version
HINT HINT HINT
Error code and channel No.
• Error codes can also be confirmed in the error code storage area of the system information function.
• The channel No. where an error is occurring can be confirmed with the GOT special register (GS262 to 264).
For details of the system information and GOT special register, refer to the following manual.
•GT Designer3 Version1 Screen Design Manual (Fundamentals)
•GT Designer2 Version

10.3.1 Error contents display

This section describes the example for displaying error code and error message on GOT.

Popup-displaying the error code and error message (Advanced alarm popup display
(System alarm))
If an error occurs, the error code and error message can be popup-displayed on the front of the monitor screen.
As alarms are popup-displayed regardless of the screen type, the error occurred will not be overlooked.

Displaying error code and error message in a list (Advanced system alarm display)
If error has occurred, error code and error message can be displayed on the list set with the screen.
Multiple errors can be displayed, or the history of display can be recorded.
Screen Design Manual
Screen Design Manual
A 1254 A 1254
B 348 B 348
04/6/1 13:20 Power module
Pop up generated alarms
regardless of the screen.
Occurred Message Restore
04/6/1 10:25 Temp. error
04/6/1 8:05 Fuse error 11:25 10:45
Create a screen to display alarms, and confirm
the details of the alarms and take measures.
10.3 Error Message and System Alarm
Check
9
10
10 - 15