Mitsubishi GT16 User Manual page 71

No. Name
1) POWER LED
2) Display screen
3) Touch key
4) USB interface (Device)
5) USB interface (Host)
6) RS-232 interface
7) Ethernet interface
8) RS-422/485 interface
9) Power terminal
10) Extension interface1
11) Extension interface2
12) CF card interface
13) CF card access LED
14) CF card access switch
15) Video/RGB interface
Terminating resistor setting switch
16)
(inside the cover)
17) Optional function board interface
18) Reset switch
19) Hole for unit installation fitting
20) Battery cover
21) Human sensor
22) Installation switch
HINT HINT HINT
Connector used for the RS-232 interface
The specification of the connector used for the RS-232 interface of GT1685 is as follows.
Manufacturer : DDK Ltd.
Model name : 17LE-23090-27 (D4CK) or equivalent product
Connector used for the RS-422/485 interface
The specification of the connector used for the RS-422/485 interface of GT1685 is as follows.
Manufacturer : Honda Tsushin Kogyo Co., Ltd.
Model name : HDR-EC14LFDT1-SLE+ or equivalent product
Lit in green : Power is correctly supplied
Lit in orange : Screen saving
Blinks in orange/green: Blown back light bulb
Not lit : Power is not supplied
Displays the Utility and the user creation screen.
For operating the touch switches in the Utility and the user creation screen
For connecting a personal computer
(Connector type: Mini-B)
For connecting a USB mouse/keyboard, data transfer and storage
(Connector type: TYPE-A)
For communicating with a controller or connecting a personal computer
(Connector type: D sub 9-pin)
For communicating with a controller or using the gateway function
(Connector type: RJ-45 (modular jack))
For communicating with a controller
(Connector type: 14-pin (female))
Power input terminal, LG terminal, FG terminal
For installing an extension unit (I/F-1)
For installing an extension unit (I/F-2)
For installing a CF card
Lit : CF card accessed
Not lit: CF card not accessed
Used for stopping the access to the CF card before removing the CF card from the GOT
ON : CF card being accessed (CF card removal prohibited)
OFF: CF card not accessed (CF card removal possible)
For mounting the video input unit, RGB input unit, video/RGB input unit, RGB output unit, or multimedia
unit
For switching on and off of the terminating resistor for the RS-422/485 communication port
For installing the optional function board
Hardware reset switch
(Inoperative in the bus connection or with the bus connection unit installed)
Hole for inserting the unit installation fitting
Houses the battery
Sensor that detects human movement
Used for OS installations at the GOT startup
4.2 Part Names and Settings of the GT1685
Description
1
2
3
4
5
6
7
8
4 - 4