Toshiba T4500 User Manual page 99

3.20.2 Operations
Selecting 7 from the DIAGNOSTIC MENU and pressing Enter, displays the following
message:
[ FDD UTILITIES ]
FORMAT Program
1. Selecting FORMAT displays the following message:
DIAGNOSTICS - FLOPPY DISK FORMAT : VX.XX
Drive number select (1:A, 2:B) ?
2. Select a drive number to display the following message:
Type select (0:2DD-2D,1:2D1-2D,2:2D-2HD,3:2HD-2HD) ?
3. Select a media/drive type number and press Enter. A message similar to the one below
will be displayed:
Warning : Disk data will be destroyed.
Insert work disk into drive A:
Press any key when ready.
4. Remove the Diagnostics Disk from the FDD, insert a work disk and press any key.
The following message will be displayed when the FDD format is executed:
[ FDD TYPE ] : TRACK
[ FDD TYPE ] : HEAD
[ FDD TYPE ] : SECTOR = XX
Format start
After the floppy disk is formatted, the following message will appear:
Selecting 1, displays the message from Step 3 above. Selecting 2 returns the test
5.
program to the DIAGNOSTIC MENU.
3-46
1 - FORMAT
2 - COPY
3 - DUMP
9 - EXIT TO DIAGNOSTICS MENU
Format complete
Another format (1:Yes/2:No) ?
= XXX
= X
[[track, head = XXX X]]