5. Remove the four M2x3 silver screws securing the FL unit LCD panel to the back frame
(Figure 4-35).
6. Turn over the panel.
7. Use a slender object, such as tweezers, to push through the four holes on the unit and un-
snap the latches to free the LCD panel from the back frame (Figure 4-36).
8. Lift off the back frame and turn over the FL unit, so it faces up (Figure 4-36).
Figure 4-36 Releasing the FL Unit with the LCD Panel from the Back Frame
Figure 4-35 Removing the FL Unit Screws
M2x3 silver screws
4-37