4.7
Status Indicator Panel (Sub LCD)
Removing the Status Indicator Panel
To remove the T4500/T4600 Family computer's status indicator panel, follow the steps below and
refer to Figure 4-12.
1. Turn off the power to the computer; disconnect the AC adapter, power cord and all external
cables connected to it.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top cover, and
keyboard as described in Sections 4.2 through 4.6.
3. Disconnect the status indicator panel cable from PJ11 on the system board.
CAUTION: The status indicator panel cable is delicate so be extremely careful not to
damage it when disconnecting it.
4. Lift out the status indicator panel (sub LCD).
4-14