[All track FORMAT]
The following selections appear at the bottom of the screen in succession:
Drive number select (1:#1,2:#2) ?
Select a drive number and press Enter. The following message will appear:
Interleave number (1/1 ~ 8) ?
Select an interleave number, 1 ~ 8 and press Enter. Pressing only Enter selects 1.
Unlock format select (1:no/2:yes)
Select whether the disk has an unlock format.
NOTE: This option appears only when an HDD manufactured by JVC is installed. For JVC
HDDs, which are the only disks with unlock formats, you must select 2 (yes). If 1 is selected
with a JVC disk, an error will be generated. The system defaults to 1 and this message does
not appear when other disks are installed.
Bad Track Register
The bad track register prompt will appear as shown below. Enter the cylinder and head
numbers of bad tracks and press Enter. Note that if there are no bad tracks, pressing
Enter alone is the same as executing all track format described below.
[ WARNING : Current DISK data will be
Press Bad cylinder number (dddd)] key ?
Press Bad head number (dd)] key ?
Enter the cylinder and head number in the format above in decimal notation. Repeat for
each bad track you want to format.
After entering the bad tracks, press Enter to execute the format.
3-38
Drive
:
Cylinder
:
Head
:
Sector
:
<<< Model name =
completely destroyed ]
#1 = HDD
#2 = Non
XXXX
XX
XX
>>>