Toshiba T4500 User Manual page 160

4.21 T4500/T4600 LCD Module
Removing the Monochrome Liquid Crystal Display (LCD) Module
CAUTION: The T4500/T4600 LCD module is easily damaged. Before removing the mod-
ule, refer to Appendix A for precautions on handling.
To remove the T4500/T4600 liquid crystal display module, follow the steps below and refer to
Figures 4-44 and 4-45:
1. Turn off the power to the computer; disconnect the AC adapter, power cord and all external
cables connected to it.
2. Remove the battery pack, optional memory card, optional PCMCIA card, top cover, display
assembly and display mask as described in Sections 4.2, 4.3, 4.4, 4.5, 4.9, and 4.13.
3. Remove the one M2.5x4 screw securing the ground cable.
4. Remove the four M2.5x4 screws from each corner of the LCD module (Figure 4-44).
5. Rotate the LCD module out of the cover from right to left (Figure 4-44).
Figure 4-44 Removing the T4500/T4600 LCD Module Screws
4-45